Használati útmutató Kramer VM-2H2
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kramer VM-2H2 (16 oldal) a Vevő kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/16
P/N: 2900-300602 Rev 4 www.kramerAV.com
USER MANUAL
MODEL:
VM-2H2
1:2 4K HDR HDMI DA
Kramer Electronics Ltd.
VM-2H2 Contents –
i
Contents
Introduction 1
Getting Started 1
Overview 3
Typical Applications 3
Dening the VM-2H2 1:2 4K HDR HDMI DA 4
Setting the DIP-Switches 4
LED Indications 5
Mounting VM-2H2 6
Connecting the VM-2H2 7
EDID Acquisition Policy 8
Upgrading the Firmware 9
Default EDID 10
Technical Specications 12
Kramer Electronics Ltd.
VM-2H2 Introduction –
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and aordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging materials for possible
future shipmen t.
• Review the contents of this user manual.
Go to www.kramerav.com/downloads/VM-2H2 to check for up- -date user manuals, to
application programs, and to check if rmware upgrades are available (where appropriate).
Achieving Best Performance
• Use only good quality connection cables (we recommend Kramer high-performance,
high-resolution cables) to avoid interference, deterioration in signal quality due to poor
matching, and elevated noise levels (often associated with low quality cables).
• Do not secure the cables in tight bundles or roll the slack into tight coils.
• Avoid interference from neighboring electrical appliances that may adversely inuence signal
quality.
• Position your Kramer away from moisture, excessive sunlight and dust.
VM-2H2
Safety Instructions
Caution:
• This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
• For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
• Do not open the unit. High voltages can cause electrical shock! Servicing by qualied
personnel only.
• To ensure continuous risk protection, replace fuses only according to the rating
specied on the product label which located on the bottom of the unit.
Termékspecifikációk
| Márka: | Kramer |
| Kategória: | Vevő |
| Modell: | VM-2H2 |
Szüksége van segítségre?
Ha segítségre van szüksége Kramer VM-2H2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Vevő Kramer
4 Január 2025
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
Útmutatók Vevő
- Vevő Cisco
- Vevő Williams Sound
- Vevő Marmitek
- Vevő Yamaha
- Vevő Radial Engineering
- Vevő Dahua Technology
- Vevő CSL
- Vevő Jolida
- Vevő Technics
- Vevő AKAI
- Vevő Saramonic
- Vevő NUVO
- Vevő Cambridge
- Vevő Crest Audio
- Vevő Velleman
Legújabb útmutatók Vevő
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
31 Március 2025
30 Március 2025