Használati útmutató Kramer WP-2UT/R-KIT

Kramer AV hosszabbító WP-2UT/R-KIT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kramer WP-2UT/R-KIT (4 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/4
WP-2UT/R-KIT Quick Start
P/N:
2 9 0 0 - 3 0 1 4 1 1 QS
Rev:
1
WP-2UT/R-KIT Quick Start Guide
This guide helps you install and use your WP-2UT/R-KIT for the first time.
Go to www.kramerav.com/downloads/WP-2UT/R-KIT to download the latest user manual and check if
rmware upgrades are available.
Step 1: Check in the b what’s ox
WP-2UT USB Transmitter
1 C-USB/AB-6 cable
Installation accessories
1 Bracket set
PT-2UR USB Receiver
1 Power adapter and cord
Frame set and faceplate
1 Quick start guide
Step 2: Get to know your -2UT/R-KIT WP
WP-2UT
#
Feature
Function
1
USB 2.0 Type B Port
Connect to USB host.
2
LINK LED
Flashes blue when a link is established.
3
ON LED
Lights green when locally powered by the power adapter.
Lights orange when powered by PoC.
4
Ring Tongue Terminal Grounding Screw
Connect to grounding wire (optional).
5
SRV (Tx, Rx)
5-pin Terminal Block
Connector (with a
common G pin)
Connect for rmware upgrade.
6
RS-232 (G, Rx, Tx)
Connect for serial extension (9600 baud rate).
7
Power Supply 2-pin Terminal Block
Connector
Connect to the power supply. Connect GND to GND, + V to + 12 12V.
8
LINK POC OUT RJ-45 Connector ◄►
Connect to the LINK IN port on the PT-2UR and to power either the device
via the receiver or the receiver by the device.

Termékspecifikációk

Márka: Kramer
Kategória: AV hosszabbító
Modell: WP-2UT/R-KIT

Szüksége van segítségre?

Ha segítségre van szüksége Kramer WP-2UT/R-KIT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek