Használati útmutató Kugoo Kirin B2

Kugoo robogó Kirin B2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kugoo Kirin B2 (5 oldal) a robogó kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
KUGOO SMART ELECTRIC BIKE-B2
English
Polish
Italian
Spanish
German
French
Dutch INSTRUCTION
Child seat*1Fender*1
Inner hexagon spanner*1
15mm Single open wrench*1
Pedal*2 Charger*1 Instruction*1
Warranty card*1
PRODUCT
PRODUCT
PRODUCT
PRODUCTPRODUCT FUNCTI
FUNCTI
FUNCTI
FUNCTIFUNCTION
ON
ON
ONON DIAGRAM
DIAGRAM
DIAGRAM
DIAGRAMDIAGRAM
1.Gear shift
2.Dash board
3.Brake handle
4.Handle bar
5.Power button
6.Standpipe
7.Vertical folding clasp
8.Safety buckle
9.Front light
10.Head tube
11.The front fork
12.Tyre
13.Wheel hub
14.Brake disc
15.Disc brake
16.Front fender
17.Frame
18.Pedal
19.Battery box
20.Crank
21.Chain wheel
22.Chain
23.Kickstand
24.Back fender
25.Seat tube
26.Seat
Note:Some details of your bike may be little different from the above picture due to our product
upgrading,which will not affect the usage.
LIST OF ACCESSORIES
FUNCTION
FUNCTION
FUNCTION
FUNCTIONFUNCTION
DC2.1 charge port
1. Installation: After unpacking, loosen the handle bar & quick release, adjust the
horizontal handle to the right direction, lock the horizontal handle, and gently hold the
brake lever several times, adjust the brake lines to the best condition.
2. On/off: Press the switch button on left handle bar to turn on the E-bike, the dash
board will light up; Press the switch button again to turn off the E-bike.
3. Charging: Connect the charger to the power plug and then to the E-bike. When the
charger indicator turns green from red, it shows full power.
4. Battery status: After booting,the dash board lights up and the electricity shows up, it
has four grids, Corresponding to high power, medium power and low power respectively
5. you can not speed up before fully loosed.Braking: Use disc brakes,
6. Headlight: the headlight is in manual control mode, the control button under the
meter, press it to turn on/off the light.
7. Rrear light: When braking, the rear light will blink slowly; In other conditions, the
rear light will be synchronous with the front light.
8. Zero speed booting: When the E-bike on standby mode, you can accelerate with
speeding bar.
9. Speed up: Please accelerate the Ebike slowly, do not twist the throttle bar too hard, in
case of broken.
10. Cruise control: While riding, keep the handle stationary and ride at a constant speed
for 8 seconds. If you release the handle, it can move at a constant speed. If you brake
again or accelerate again, will cancel the cruise function.
11. Electric mode and Assisting mode: the default of the Ebike is assisting mode, only one
gear. While it is assisting mode, also can use the electric mode.

Termékspecifikációk

Márka: Kugoo
Kategória: robogó
Modell: Kirin B2

Szüksége van segítségre?

Ha segítségre van szüksége Kugoo Kirin B2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók robogó Kugoo

Kugoo

Kugoo Kirin M4 Útmutató

12 Augusztus 2024
Kugoo

Kugoo Kirin B1 Pro Útmutató

11 Augusztus 2024
Kugoo

Kugoo Kirin Mini2 Útmutató

11 Augusztus 2024
Kugoo

Kugoo Kirin B2 Útmutató

10 Augusztus 2024
Kugoo

Kugoo Kirin M4 Pro Útmutató

10 Augusztus 2024
Kugoo

Kugoo Kirin S1 Útmutató

4 Augusztus 2024
Kugoo

Kugoo Kirin B1 Útmutató

13 Május 2024

Útmutatók robogó

Legújabb útmutatók robogó