Használati útmutató La Crosse Technology WS-9066U-IT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót La Crosse Technology WS-9066U-IT (6 oldal) a Software kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.6 csillagra

1

LCD

Display

Function keys

WS-9066U-IT

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-

art weather station as an example of innovative

design and quality piece of engineering.

Provides time, calendar, weather forecast, moon

phase, indoor and outdoor temperature, indoor

and outdoor relative humidity. This unit will

never keep you guessing on current and future

weather conditions. Operation of this product is

simple and straightforward. By reading this

operating manual, the user will receive a better

understanding of the Weather Station.

FEATURES:

The Weather Station

2

Stand

Function keys

x12/24 hour time display

xCalendar display (year only in setting

mode)

xDisplay 8 Moon phases throughout the

year

xTemperature display in ºC/ ºF

xIndoor and outdoor temperature display

with MIN/MAX records

xIndoor and outdoor humidity display

xHumidity data display as RH%

xLow battery indicator

xTable standing or wall mounting

Battery

compartment

Hanging

hole

3

Thermo-Hygro Transmitter

xWall mount bracket

xMounting at a sheltered place.

xAvoid direct rain and sunshine

DO NOT MIX OLD AND NEW BATTERIES.

DO NOT MIX ALKALINE, STANDARD, OR

RECHARGEABLE BATTERIES

TO INSTALL AND REPLACE BATTERIES

IN THE THERMO-HYGRO TRANSMITTER

The outdoor thermo-hygro transmitter uses 2 x

AAA, IEC LR3, 1.5V batteries. To install and

replace the batteries, please follow the steps

below:

1. Remove the battery cover.

2. Insert the batteries,

observing the correct polarity (see

battery compartment marking).

3. Replace the battery cover

on the unit.

Note:

In the event of changing batteries

in any of the units, all units need

to be reset by following the setting up

procedures. This is due to a random security

Wall mount

bracket

Remote transmission of outdoor

temperature and humidity to

weather station by 915MHz

4

code assigned by the transmitter at start-up.

This code must be received and stored by the

weather station in the first 3 minutes of power

being supplied to the transmitter.

TO INSTALL AND REPLACE BATTERIES

IN THE WEATHER STATION

The weather station uses 2 x AAA, IEC LR3,

1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Insert finger or

other solid object in

the space at the

bottom center of the

battery compartment

and lift up to remove

the cover.

2. Insert batteries

observing the correct

polarity (see marks).

3. Replace compartment cover.

BATTERY CHANGE:

It is recommended to replace the batteries in all

units on an annual basis to ensure optimum

accuracy of these units.

Please participate in the

preservation of the environment.

Return used batteries to an

authorized depot.

Termékspecifikációk