Használati útmutató LevelOne PLI-2040
LevelOne
Powerline adapter
PLI-2040
Olvassa el alább 📖 a magyar nyelvű használati útmutatót LevelOne PLI-2040 (8 oldal) a Powerline adapter kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/8
LevelOne
PLI- 2040
200Mbps HomePlug AV Adapter
User Manual
V1.1
HomePlug PowerLine
HomePlug PowerLine is an excellent solution that can be used to extend your network. In the home or small office
building, use HomePlug Ethernet Bridge Adapters to link multiple locations without the need to run Ethernet cable.
Combined with a broadband DSL/Cable connection, every room with electrical power outlets will have easy access
to high-speed Internet connection.
Introduction
200Mbps HomePlug AV Adapter allows you to connect any device which has an Ethernet port to a PowerLine net-
work. In operation, the HomePlug AV Adapter is completely transparent, and simply passes data between 200Mbps
the Ethernet port and the PowerLine network. The PowerLine data transfer rate can reach be ed up to 200Mbps.
Any device may be connected to the HomePlug Ethernet Bridge s Ethernet port, but a Windows PC must 200Mbps ’
be used for configuration.
* Strongly recommend Windows 2000/XP/Vista for utility configurati /7 on
Physical Details
Figure 1 Mbps HomePlug AV Adapter : 200
Front Panel LEDs
Power
On - Normal operation.
Off - No power
Sleep - blanking
HomePlug
On - The PowerLine network is active. This means that at least one other HomePlug de-
vice was detected.
Off - PowerLine network is not available - HomePlug devices were detected. no other
Flashing - Data is being transmitted or received via the PowerLine network.
Ethernet
On - Ethernet connection is active.
Off - No Ethernet connectio n.
Flashing - Data is being transmitted or received via the Ethernet Port.
LED Link quality (Data PHY Rate)
Green:100 ~ (good link quality) Mbps
Orange:50~99Mbps
Red: less 50Mbps (bad link quality)
Setup
Configuration requires the use of Windows PC. Once configured, any device may be connected to the 200Mbps
HomePlug AV Adapter's Ethernet port. To perform configuration, follow procedures list below. the
1. 200 Connect a standard LAN cable from the Mbps HomePlug AV Adapter's Ethernet port to your PC.
2. 200 Plug the Mbps HomePlug AV Adapter into a power outlet.
3. Wait a few seconds for startup to be completed, and then check the LEDs
The LED should be ON. Power
The LED will be ON if other HomePlug devices are detected, otherwise it will be OFF. HomePlug
The LED should be ON. Ethernet
4. Insert the supplied CD-ROM into your Windows PC, and wait for it to start, select Utility“ ” from the autorun
screen. If it does not start automatically, locate and run SETUP.EXE.
5. Follow the prompts to install the utility. PLI-2040
Termékspecifikációk
| Márka: | LevelOne |
| Kategória: | Powerline adapter |
| Modell: | PLI-2040 |
Szüksége van segítségre?
Ha segítségre van szüksége LevelOne PLI-2040, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Powerline adapter LevelOne
29 Szeptember 2024
2 Augusztus 2024
20 Július 2024
17 Július 2024
15 Július 2024
14 Július 2024
13 Július 2024
11 Július 2024
3 Július 2024
2 Július 2024
Útmutatók Powerline adapter
- Powerline adapter Sitecom
- Powerline adapter Manhattan
- Powerline adapter TRENDnet
- Powerline adapter GBS Elettronica
- Powerline adapter Renkforce
- Powerline adapter I-TEC
- Powerline adapter Hirschmann
- Powerline adapter D-Link
- Powerline adapter TP-Link
- Powerline adapter Planet
- Powerline adapter Eero
- Powerline adapter Maginon
- Powerline adapter Edimax
- Powerline adapter DeLock
- Powerline adapter Konig
Legújabb útmutatók Powerline adapter
14 Január 2025
13 Január 2025
13 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
29 December 2024
24 December 2024
24 December 2024
20 December 2024