Használati útmutató LevelOne POR-0122
LevelOne
wifi ismétlő
POR-0122
Olvassa el alább 📖 a magyar nyelvű használati útmutatót LevelOne POR-0122 (9 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/9

POR-0 0 12
POR- 0122
Gigabit PoE Repeater
2- Port Gigabit PoE Repeater
Quick Installation Guide
English
Português
Deutsch
Svenska
Français
Slovenščina
Español
繁體中文
Nederlands
한국어
Dansk
Русский
Italiano
Polish
Ελληνικά

Product Diagram
English
Hardware Installation
Step 1: Connection to Power over Ethernet Switch
A. Connect one of the Ethernet Switch port with PoE power supply to the PoE IN port of
POR-0 012 /0122 as the following connection.
B. The LED indicators “ on indicating the PoE and Ethernet POWER” and “ PoE IN” will turn
connection.
C. The LED indicators “PoE IN” will flash to indicate Ethernet data activity.
Step 2: Connection to PoE PD
D. Connect the“ to power up the PD device PoE OUT” port of POR-0 012 /0122 as the following
connection.
E. The LED indicators “ will turn on indicating the PoE and Ethernet connection.PoE OUT”
F. The LED indicators “PoE OUT” will flash to indicate Ethernet data activity.
** Note: If the Ethernet cable is not standard CAT5 cable, the POR-0 0 12 /0122 may be working for
shorter length than 100 meter.

Deutsch
Hardware Installation
Schritt 1: Anschluss an den Power over Ethernet Switch
A. Verbinden Sie einen der Ethernet Switch Ports mit PoE Spannungsversorgung an den
PoE- - -In Port des POR 0120/0122 wie im oberen Diagramm gezeigt.
B. DieLED Anzeigen “Power” und “PoE In” leuchten und zeigen eine Verbindung von PoE und
Ethernet an.
C. Die LED “PoE IN” blinkt, wenn Netzwerkaktivität besteht.
Schritt 2: Anschluss an PoE PD
D. Verbinden Sie den Port des P “PoE OUT” OR-0120/0122 zur Stromversorgung mit dem PD
wie im oberen Diagramm gezeigt.
E. Die LED “PoE OUT” leuchten und zeigen eine Verbindung von PoE ind Ethernet an.
F. Die LED “PoE OUT” blinkt, wenn Netzwerkaktivität besteht.
** Hinweis: Wenn das Ethernet Kabel kein Standard Cat.5 Kabel ist, kann der POR-0120/0122 nicht
die vollen 100m gewährleisten.
Français
Installation de l'équipement
Etape 1 : Connexion au commutateur Alimentation via Ethernet
A. Connectez un port du commutateur Ethernet avec alimentation PoE au port PoE IN de
POR-0120/0122 comme indiqué.
B. Les voyants DEL “ s'allumeront indiquant PoE et la connexion POWER” et “PoE IN”
Ethernet.
C. Les voyants DEL “ ” clignoteront pour indiquer les activités des données via Ethernet.PoE IN
Etape 2 : Connexion à PoE PD
D. Connectez le port “PoE OUT” OR-0de P 120/0122 pour alimenter l'appareil PD comme
indiqué.
E. Les voyants DEL “ s'allumeront indiquant PoE et la connexion Ethernet.PoE OUT”
F. Les voyants DEL “PoE OUT” clignoteront pour indiquer les activités des données via
Ethernet.
** Remarque : Si le câble Ethernet n'est pas un câble CAT5 standard, le POR 0120/0122 peut -
fonctionner sur une distance de moins de 100 mètres.
Termékspecifikációk
Márka: | LevelOne |
Kategória: | wifi ismétlő |
Modell: | POR-0122 |
Szüksége van segítségre?
Ha segítségre van szüksége LevelOne POR-0122, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók wifi ismétlő LevelOne
2 Szeptember 2024
2 Szeptember 2024
12 Augusztus 2024
8 Augusztus 2024
5 Augusztus 2024
5 Augusztus 2024
2 Augusztus 2024
30 Július 2024
29 Július 2024
28 Július 2024
Útmutatók wifi ismétlő
- wifi ismétlő Sabrent
- wifi ismétlő Nitek
- wifi ismétlő Digitus
- wifi ismétlő StarTech.com
- wifi ismétlő Silex
- wifi ismétlő Renkforce
- wifi ismétlő Crestron
- wifi ismétlő NGS
- wifi ismétlő NetComm
- wifi ismétlő Medion
- wifi ismétlő SilverCrest
- wifi ismétlő Atto
- wifi ismétlő Asus
- wifi ismétlő EXSYS
- wifi ismétlő Tenda
Legújabb útmutatók wifi ismétlő
30 Március 2025
30 Március 2025
25 Március 2025
13 Január 2025
12 Január 2025
6 Január 2025
4 Január 2025
3 Január 2025
31 December 2025
31 December 2025