Használati útmutató LiftMaster 71-17148

Olvassa el alább 📖 a magyar nyelvű használati útmutatót LiftMaster 71-17148 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/1
To prevent possible SERIOUS INJURY or DEATH:
Disconnect power at the fuse box BEFORE proceeding.
Operator MUST be properly grounded and connected in
accordance with national and local electrical codes.
ALL electrical connections MUST be made by a qualified
individual.
WARNING
WARNING
WARNING
WARNING
WARNING
© 2010, The Chamberlain Group, Inc.
01-17150B All Rights Reserved
RETROFIT FUSE LINK KIT
71-17148
APPLICATION
For use with models FDC and FDCL Fire Door Operators.
INSTALLATION
1. Mount (optional) fuse link retrofit switch in any convenient
location to interface with existing fuse link arrangement.
2. Connect existing fuse link chain to “key-ring” on fuse link
switch.
3. Adjust existing fuse link arrangement to be sure that proper
tension is supplied to the fuse link switch actuator (key-ring).
The actuator should be fully extended. There should be
continuity between the switch leads (Normally Closed).
4. Release the fuse link and be sure the fuse link switch actuator
(key-ring) retracts completely with no binding. There should be
NO continuity between the switch leads (Open Electrically).
5. Wire fuse link switch leads through conduit (not provided).
All wiring and conduit should be run in accordance with all
national and local electrical codes.
a) Remove factory supplied “Jumper” between TB1-5, TB1-6
and discard.
b) Make required connections to motor operator TB1-5, TB1-6
(Alarm Input #2).
ALARM INPUT #2
(FACTORY JUMPER SUPPLIED)
TB1
ELECTRONIC
FUSE LINK
1
2
3
7
4
5
8
6
9
10
Existing Fuse Link
Existing Fuse Link Chain
Center Line
of Door
Fuse Link Retrofit
Switch (optional)
Key-ring
(DOOR HOOD)
WARNING

Termékspecifikációk

Márka: LiftMaster
Kategória: nincs kategorizálva
Modell: 71-17148

Szüksége van segítségre?

Ha segítségre van szüksége LiftMaster 71-17148, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek