Használati útmutató LiftMaster 811LMX
LiftMaster
nincs kategorizálva
811LMX
Olvassa el alább 📖 a magyar nyelvű használati útmutatót LiftMaster 811LMX (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/12

Introduction
The 811LMX and 813LMX are programmable
DIP switch remote controls for use with
LiftMaster commercial products using Security+
2.0® Encrypted DIP, as well as older 315 MHz
DIP or 390 MHz DIP devices. The remote control
default setting is Security+ 2.0®.
The 813LMX model is designed for OPEN/
CLOSE/STOP functionality.
The images throughout this manual are for
reference only and your product may look
different.
1 Slide the cover open to access the DIP
switches.
2 Use a pen or screwdriver to slide the DIP
switches to any position you want (ON or OFF).
811LMX 813LMX
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other
reproductive harm. For more information
go to www.P65Warnings.ca.gov.
To prevent possible serious injury or death from
a moving gate or garage door:
• ALWAYS keep remote controls out of reach
of children. NEVER permit children to
operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be
seen clearly, is properly adjusted, and there
are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight
until completely closed. Never permit anyone
to cross path of moving gate or door.
PROGRAMMABLE DIP SWITCH
REMOTE CONTROLS
Models 811LMX and 813LMX
Programming
Step 1: Set the DIP Switches
Cover
DIP
Switch
OFF
ON
12 11 10 9 8 7 6 5 4 3 2 1
NOTE: If you are ‘matching’ the DIP switch setting
from an existing 61LM or 361LM, your original
remote setting cannot be using ANY of the center
‘0’ settings and Position 1 must be in the OFF
position. If your original remote does have any ‘0’
settings or Position 1 in the ON position, please
select a new DIP setting on your 811LMX and
program it into your commercial receiver. Any
future 811LMX remotes will copy this setting and
will be programmed to the appropriate Security
Type.
Termékspecifikációk
| Márka: | LiftMaster |
| Kategória: | nincs kategorizálva |
| Modell: | 811LMX |
Szüksége van segítségre?
Ha segítségre van szüksége LiftMaster 811LMX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva LiftMaster
3 Szeptember 2024
2 Szeptember 2024
2 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
1 Szeptember 2024
26 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Artex
- nincs kategorizálva SEB
- nincs kategorizálva IBasso
- nincs kategorizálva Copco
- nincs kategorizálva HK Audio
- nincs kategorizálva Four Hands
- nincs kategorizálva Estella
- nincs kategorizálva Jordan
- nincs kategorizálva Sommer
- nincs kategorizálva Now TV
- nincs kategorizálva Topcraft
- nincs kategorizálva Alienware
- nincs kategorizálva Prism Sound
- nincs kategorizálva Catlink
- nincs kategorizálva Energizer
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025