Használati útmutató Lindy 84001

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lindy 84001 (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/10
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (September 2014)
Raspberry Pi RF Transmitter
User Manual English
No. 84001
www.lindy.com
User Manual English
Introduction
Thank you for purchasing this RF controlled Raspberry Pi starter kit. Using this RF transmitter add on
board, you can control up to 4 radio controlled sockets from your Raspberry Pi.
The add-on board connects to the row of pins called the GPIO which can be controlled as either input or
output lines under the control of software .
We have written a simple program in Python to allow you to switch the remote controlled sockets on and
off with a single key press.
Package Contents
1 x RF transmitter add on board
2 x Radio Controlled Sockets
Features
Short range radio transmitter
Simple plug in installation
Up to 10 individual commands
Easy software control
Ideal learning and experimental tool
Compatible with 73113 (3 Pack Remote Control Sockets) & 73122 (4 Way Remote Controlled Strip)
Requirements
Raspberry Pi Version A or B
Installed OS: Raspian (or other LINUX OS with Python installed)
Installation
Installing the board
Install the board on to the row of pins as shown below and connect your Raspberry-Pi as normal to a
monitor, mouse, keyboard and USB power supply.

Termékspecifikációk

Márka: Lindy
Kategória: nincs kategorizálva
Modell: 84001

Szüksége van segítségre?

Ha segítségre van szüksége Lindy 84001, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek