Használati útmutató Lorex C841CA

Lorex Térfigyelő kamera C841CA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lorex C841CA (2 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

4K Ultra HD Bullet Security Camera

C841CA_QSG_EN_R1

• 4K Ultra HD Bullet Security Camera

• Mounting Kit*

• BNC / Power Extension Cable*

• Power Adapter**

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with

care.

• Use the camera within given temperature, humidity and voltage levels

noted in the camera’s speciﬁcations.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of

intense light.

• Use only the supplied regulated power supply provided with the

product. Use of a non-regulated, non-conforming power supply can

damage the product and void the warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use

any harsh, chemical-based cleaners.

• The supplied cable is rated for surface and in-wall mounting only.

Cables for ﬂoor-to-ﬂoor installations are sold separately (CMR type).

These and other cables are available at .lorex.com

• Point the camera where there is the least amount of obstructions

(i.e., tree branches).

• Install the camera where vandals cannot easily reach.

• Secure cabling so that it is not exposed or easily cut.

• This camera is rated for outdoor use. Installation in a sheltered

location is recommended.

* Per camera in multi-camera packs.

** A multi-camera power adapter that provides power to multiple

cameras or individual power adapters may be provided depending on

product conﬁguration.

As our products are subject to continuous improvement, Lorex reserves the right

to modify product design, speciﬁcations and prices, without notice and without

• For a full list of compatible recorders, visit lorex.com/compatibility.

• To ensure that you are viewing camera video in full 4K resolution (4K

monitor required), check the video output resolution of your recorder.

For full instructions, see your recorder’s documentation at lorex.com.

• Not intended for submersion in water. Installation in a sheltered

location recommended.

• This camera includes an Auto Mechanical IR Cut Filter. When the

camera changes between Day/Night viewing modes, an audible clicking

noise may be heard from the camera. This clicking is normal, and

indicates that the camera ﬁlter is working.

Quick Start Guide

English Version 1.0

C841CA SERIES

Package Contents

ATTENTION:

A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this

camera (included). Use of a non-regulated, non-conforming power supply can

damage this product and voids the warranty.

Safety Precautions

Installation Tips

Dimensions

6.2” / 158mm2.8” / 71mm

Disclaimers

www.lorex.com

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the Downloads tab

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

Resources

Individual Power Adapter* Multi-Camera Power Adapter*

* Images for representation only.

To install your camera:

1. Set the camera in the desired mounting position and mark

holes for screws through the camera base.

2. Drill the holes, then feed the cable through the mounting

surface or cable notch.

NOTE: Insert the included drywall anchors if you are

mounting the camera onto drywall.

3. Mount the camera stand to the mounting surface using

the provided screws. Make sure all screws are fastened

tightly.

4. Adjust the camera as shown below:

Installing the Camera

Connect the male power head

and the BNC connector to the

camera.

Connect the BNC connector

to a video input on your DVR.

Connecting the Camera

Cable Notch

C841CA_QSG_EN_R1

Power Adapter Types

A multi-camera power adapter that provides power to multiple cameras

or individual power adapters may be provided, depending on product

conﬁguration.

Problem Solution

Picture does not

appear to be 4K

• To ensure that you are viewing camera video in full

4K resolution (4K monitor required), check the video

output resolution of your DVR. For full instructions,

see your DVR’s documentation at .lorex.com

No picture / signal • The cameras are only compatible with certain Lorex

HD DVRs. For the full list of compatible recorders, visit

lorex.com/compatibility.

• Ensure your TV or monitor is on the correct input

channel. Common terms for input channels: INPUT, AV

CHANNEL, LINE1, LINE2, AUX.

• Ensure your DVR is properly connected to your TV or

monitor.

• Ensure connections are properly connected.

• Ensure the camera power supply is plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a source

of light (e.g., sun or spot light).

• Check the brightness settings of the DVR and monitor.

• Move your camera to a different location.

Picture is too dark • Check the brightness and contrast settings of the

DVR and monitor.

Night vision is not

working

• The night vision activates when light levels drop. The

area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust, spiderwebs.

Clean the lens with a soft, clean cloth.

• Make sure that the cable run is within the limitations

speciﬁed in the section ‘Cable Extension Options’.

• Remove the vinyl ﬁlm from the camera lens when your

installation is complete.

Bright spot in video

when viewing camera

at night

• Night vision reﬂects when pointing a camera through a

window. Move the camera to a different location.

Person and vehicle

detection is not

working.

• Support for person and vehicle detection is

deteremined by your recorder. See your recorder’s

documentation to conﬁrm support for this feature.

Troubleshooting

A. ROTATING THE ARM: Loosen the adjustment ring by turning it

counter-clockwise. Rotate the arm of the camera up to 360°, then

tighten the adjustment ring against the base.

B. BENDING THE ARM: Use a Phillips head screwdriver (not included)

to loosen the adjustment screw closest to the camera base. Bend the

arm of the camera up to 90°, then tighten the screw.

C. LEVELING THE CAMERA: Use the screwdriver to loosen the

adjustment screw furthest from the camera base. Rotate the camera

until it is level with the viewing area, then tighten the screw.

ATTENTION:

Test your camera prior to selecting a permanent mounting location by

temporarily connecting the camera and cable to your DVR.

Before Installing the Camera

• Decide whether to run the cables

through the wall / ceiling (drilling

required) or along the wall / ceiling.

• If you run the cables along the

wall / ceiling, you must run the

cable through the on the cable notch

base. This will keep the camera base

ﬂush to the surface when mounted.

A B C

Connect the female power

head to the included power

adapter.

Camera DVR

Male Power Female Power

Setup Diagram

BNC Video

12V DC Power

Camera

Extension Cable

Power Adapter

HD DVR

Extend the cable run for your camera depending on the cable type used.

Additional extension cables sold separately. See table below:

Cable Extension Options

Option Model Number Cable Length

1CB120URB 120ft (37m)

2CB250URB 250ft (76m)

NOTES:

1. The extension cable must be a single stretch of cable between the DVR and

camera. You cannot connect multiple extension cables to each other.

2. Extending camera cable runs beyond the included cable length may require

you to connect the power supply directly to the camera rather than to the

extension cable.

3. Indicators that your cable run may be too long:

• Camera loses video when switching to night vision.

• Video is permanently black & white (even during day time).

• Video is unclear, soft, or distorted.

4. For more information on extension cables, visit lorex.com and search for the

model numbers of the cables above.

5. Remove the vinyl ﬁlm from the camera lens when your

installation is complete.

Termékspecifikációk

Márka:	Lorex
Kategória:	Térfigyelő kamera
Modell:	C841CA

Szüksége van segítségre?

Ha segítségre van szüksége Lorex C841CA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Térfigyelő kamera Lorex

Lorex LNZ43P4A Útmutató

8 Január 2025

Lorex C221NA Útmutató

8 Január 2025

Lorex C221NC Útmutató

8 Január 2025

Lorex W463AQ Útmutató

2 Január 2025

Lorex E891AB Útmutató

7 Október 2024

Lorex DP181-42NAE Útmutató

29 Szeptember 2024

Lorex Baby BB2411AC1 Útmutató

8 Szeptember 2024

Lorex E842CA Útmutató

2 Szeptember 2024

Lorex E842CAWP Útmutató

2 Szeptember 2024

Lorex E842CAB Útmutató

2 Szeptember 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

Hikvision DS-2CE10DF8T-FSLN Útmutató

6 Április 2025

Hikvision DS-2CE56C0T-IRPF Útmutató

5 Április 2025

Hikvision DS-2CD2141G1 Útmutató

5 Április 2025

Dahua Technology Pro IPC-HDPW5442G-Z Útmutató

15 Január 2025

Toshiba IKS-WR7412 Útmutató

14 Január 2025

Flir FC-610 O Útmutató

13 Január 2025

AVerMedia FC1320-P Útmutató

13 Január 2025

Digitus OptiMax DN-16037 Útmutató

13 Január 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Útmutató

13 Január 2025

Hikvision IDS-2CD7526G0-IZHSY Útmutató

13 Január 2025