Használati útmutató Lorex ETP-01T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lorex ETP-01T (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 24 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.0 csillagra

Package

ETP-01T (Transmitter)

ETP-01R (Receiver)

Quick Start

Guide

Hardware Overview

Overview

ETP-01 Series are High-Speed, long distance Ethernet & PoE extender

that makes possible to transmit the Ethernet signal and PoE up to

300m through single pair of twisted wires.

It is cost-effective and time saving solution to migrate existing

analog system to IP based system since ETP-01 series support easy

installation utilizing the existing UTP bundle cables or any single

twisted pair cables.

With long distance transmission feature, the device makes to

overcome 100 meters distance limitation easily and reduces the

construction cost significantly compared with fiber optic configuration.

Features



Long reach Ethernet & PoE extension over existing 2-Wire twisted

cable



Data + Power over twisted cable



Data and PoE distance up to 300 m



100Mpbs Full Duplex



PoE, PoE+, Extra PoE (Max. 60W PoE output, ETP-01T model only

with DC Power adapter)



LED Indication (Data, Power)



Plug & Play



Surge Protection



Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR

(ETP-01R model only)



Slim design

Quick Start Guide

ETP-01T / ETP-01R

Please read carefully the instruction manual before use.

Contents of this manual are subject to change without prior

notice for reasons such as functionality enhancements.

Installation Guide

1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to

ETP-01R. Check LEDs on ETP-01R.

Ethernet cable

(Cat5e or better)

2-Wire Twisted cable

PoE Switch/NVR

Check LEDs

Check LEDs

Ethernet cable

(Cat5e or better)

2. Connect single twisted pair cable to ETP-01R.

Connect single twisted pair cable from ETP-01R to ETP-01T.

Ethernet cable

(Cat5e or better)

2-Wire Twisted cable

PoE Switch/NVR

Check LEDs

Check LEDs

Ethernet cable

(Cat5e or better)

3. Connect Ethernet cable (Cat5e or better) from ETP-01T to IP

Camera. Check LEDs on ETP-01T.

Î

Set ETP-01T, PoE Switch ON to supply direct power to IP camera.

Set ETP-01T, PoE Switch OFF to connect PC or network switch

devices.

Ethernet cable

(Cat5e or better)

2-Wire Twisted cable

PoE Switch/NVR

Check LEDs

Check LEDs

Ethernet cable

(Cat5e or better)

LED Indicators

IndicatorColorFunction

LINK

Ethernet Data Act

ACT

Ethernet Connect Act

Attention polarity(, ).

Rev.4.0

Right

Left

Top

상태 표시등상태 표시등

LINK

ACT

RJ45

DC전원어댑터Teminal 커넥터

제품고정

나사용홀

제품고정

나사용홀

PoE 스위치 ON/OFF

(ETP-01T 만 해당)

Status LED Indicator

LINK

Status LED Indicator

ACT

DC Power JackTeminal connector

PoE Switch ON/OF

(ETP-01T only)

Mounting

Screw Hole

Mounting

Screw Hole

Termékspecifikációk