Használati útmutató Lorus NRFBX

Lorus Órák NRFBX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lorus NRFBX (2 oldal) a Órák kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
I
NSTRUCTION
M
ANUAL
on attaching/removing the watch band
NRFBX 8-2002
The watch band is easy to change.
Follow the instructions below to remove or attach the
band to the watch. Use the enclosed tool for this
purpose.
How to remove the separate type band
Caution
Be careful of your fingers when handling the
tool.
Warning
Keep the small parts (push-pins etc.) away
from children. If a child swallows any of them,
consult the doctor immediately.
The reverse procedures will be applied in order to attach the separate type band.
2
3
1. Place the tip of the tool to the projecting edge of
the push-pin.
2. Press it down. (With its inserted spring,
the push-pin is shrinkable.)
3. The band will be easily removed.
1
Use the two-forked end of the tool to attach and remove the push-pin.
How to attach the one-piece band
1. Set the push-pin into the watch head by
using the tool.
2. Pass the band underneath
the watch head.
3. Pull down the band. 4. Pass the band through
the ring.
5. Pull the band down
once again to fasten.
The reverse procedures will be applied in order to remove the one-piece band.
1
2 3 4 5
To attach the push-pin to the watch head,
refer overleaf How to remove the
separate type band.
Use the two-forked end of the tool to attach and
remove the push-pin.

Termékspecifikációk

Márka: Lorus
Kategória: Órák
Modell: NRFBX

Szüksége van segítségre?

Ha segítségre van szüksége Lorus NRFBX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek