Használati útmutató Louis Tellier 208040

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Louis Tellier 208040 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
208040 en ma 2012.09
*208.040 TRITURATOR - MANUAL
MOULIN N°10
INSTRUCTIONS
DISMANTLING
Casing:
Press slightly on one of the two fastening lugs and release
from side of hopper
Hopper and Cross-piece:
Press on the two holding springs, in order to have the clips
drop down by themselves.
Shaft:
Pull it out by rotating it clockwise, in order to keep clear of
the stopping blade.
Sieve:
Seize it in bath hands by the outer side and unfasten
anticlockwise with a dead blow.
NOTE
When the machine is new, the inside of the sieve is rough, in
order to make the L.T. TRITURATOR effective.
On the contrary, when the inside of the sieve is becoming
smooth, it must be replaced.
P10006
handle
P10003
central spiral spring / shaft
P10001
hopper
P10010
15-20-30-40
sieve
P10004
anti-splash cylinder
M5003
holding spring
P10007
tripod with holding spring
P10005
cross-bar
full-sized sieve perforations
1 mm 1,5 mm 2 mm 3 mm 4 mm

Termékspecifikációk

Márka: Louis Tellier
Kategória: nincs kategorizálva
Modell: 208040

Szüksége van segítségre?

Ha segítségre van szüksége Louis Tellier 208040, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek