Használati útmutató Lowrance EP-10 Fuel Flow

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lowrance EP-10 Fuel Flow (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.4 csillagra

1

`Pub. 988-0154-431

EP-10 Fuel Flow

Electronic Sensor

Installation Instructions

This instruction manual explains how to install your EP-10 fuel flow

sensor and connect it to a NMEA 2000 network using LowranceNET

network components. You must refer to your digital gauge, sonar or

GPS unit's manual for sensor operation instructions.

Caution:

Installing LowranceNET NMEA 2000 devices is significantly

differentfrom installing earlier Lowrance components without

NMEA 2000 features. You should read all of the installation

instructions before proceeding. You should decide where to

install all components before drilling any holes in your vessel.

Some sonar or GPS units may require a software upgrade to display

NMEA 2000 data correctly and a manual addendum describing how to

operate the sensor. You can download these free and get additional

information on the NMEA 2000 compatible LowranceNET system at

our web site, .www.lowrance.com

WARNING:

Do not use this sensor with diesel engine fuel systems.

The EP-10 is designed only for gasoline engines. Please

see fuel filter warning on page 4 for additional

information.

The EP-10 Fuel Flow sensor.

Blue female NMEA

2000 connector

Sensor

module

Termékspecifikációk