Használati útmutató Lumie BodyClock Advanced 200

Lumie fényterápia BodyClock Advanced 200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lumie BodyClock Advanced 200 (38 oldal) a fényterápia kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 3.9 csillagra

Oldal 1/38
OPERATING INSTRUC TIONS
NOTICE DUTILISATION
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
OPERATING INSTRUCTIONS
Bodyclock Advanced 200
1 Safety
2 Getting started
3 The display
4 The four control buttons
5 Setting the time
6 Setting the clock to 12 or 24 hours
7 Using the Bodyclock as a reading light
8 Setting the sunrise (to wake you up)
9 Setting the wake-up speed
10 Using snooze
11 Disabling the back-up beeper
12 Setting the sunset (go-to-sleep program)
13 Setting the sunset to end as a nightlight
14 Adjusting the brightness of the clock
display
15 Setting Sleepsound (white noise)
16 Security mode
17 Demo mode
18 Problem solving
19 Programming summary
2|www.lumie.com |lumie careline 0845 658 9292
English
1Safety
!Keep the glass globe over the bulb, unless the bulb is cold and the
lamp unplugged.
!Maximum 42W halogen bulb/40W candle bulb.
!The glass globe will be warm to the touch, so keep it clear of
anything that might deteriorate in contact with heat.
!Keep the Bodyclock away from water and damp. For indoor use only.
!Don't open the casing for any reason. There are no user-serviceable
parts inside.
2Getting started
!Remove the 'globe', the glass cover over the bulb, with a gentle
upward tug.
!Screw in the bulb rmly and replace the globe.
!Find a good position for the Bodyclock close to the bed-head.
!Plug the Bodyclock into the mains. The display will flash on and off
until the time has been set.
!Once you've programmed the Bodyclock Advanced, all settings will
be memorised if the unit is unplugged or if there's a power failure. If
the power is out for a short period, it will even keep track of time.
!To program the clock A must be depressed ( not lit). Pressing the
P button repeatedly will take you through each of the
programming options in turn (see 19 for the list of options). Within
the next few seconds press +or to change the setting. NOTE: the
clock will revert to its normal state if no button is pressed for 12
seconds.
!When replacing the bulb, always unplug the Bodyclock. Spare
sunshine neodymium bulbs are available from the Lumie Careline.
4|www.lumie.com |lumie careline 0845 658 9292
English

Termékspecifikációk

Márka: Lumie
Kategória: fényterápia
Modell: BodyClock Advanced 200

Szüksége van segítségre?

Ha segítségre van szüksége Lumie BodyClock Advanced 200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek