Használati útmutató M-Audio Solaris

Olvassa el alább 📖 a magyar nyelvű használati útmutatót M-Audio Solaris (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 26 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.3 csillagra

Introduction

Thank you for purchasing the Solaris microphone from M-Audio. Please take a

few moments to read the following guide into order to get the maximum

results from your microphone.

Important: Please fill out and mail your warranty card for the Solaris

immediately so that we may provide you with support for your microphone (you

may also register online at www.m-audio.com/register).

Features

>Large all brass capsule

>Class A FET Electronics

>Includes shock mount and hard case

>3 Polar patterns: cardioid, omni and figure 8

>10dB switchable attenuation pad

>Bass Cut pad, 6dB per octave

>1.1” evaporated gold diaphragm

Unpacking

The container for your microphone was carefully constructed for protection

during shipping. Please save this packaging for storage or traveling with your

Solaris microphone. If your box does not include the following items, please

contact your dealer immediately:

1 M-Audio Solaris microphone

1 hard case

1 shock mount

Care of Your Microphone

Here are a few tips for care of your Solaris microphone:

>Never subject the Solaris to physical shock.

>Always use the included shock mount when securing to a stand.

>Always wipe the Solaris exterior down with a soft dry cloth and return

the Solaris to its case after each use to prevent damage from dust and shock.

>In the event that your Solaris needs more extensive cleaning, lightly

dampen a soft cloth with water or mild household soap and clean the

metal exterior of the Solaris, wiping it completely dry when finished.

Never spray a cleaning agent on the microphone itself, as the

moisture can damage the unit.

>Avoid subjecting the Solaris to any kind of moisture. In vocal

applications, moisture from breath condensation / saliva build-up

can be prevented by use of a windscreen.

>Never disassemble the Solaris microphone. There are no user-

serviceable parts inside.

>Always use top-quality cables in order to avoid shorts that may

damage the microphone’s electronics.

>Avoid temperature extremes above 95F and below 50¡ ¡F. When

moving the microphone between outdoor and indoor environments,

allow the microphone to acclimate to room temperature before

connection and use, in order to avoid condensation on the diaphragm.

Connections and Phantom Power

The M-Audio Solaris microphone outputs a balanced, low impedance signal.

It requires the additional signal boost acquired via connection to mic-level

inputs of a preamp or mixer channel.

As with all condenser microphones, your Solaris condenser requires power in

order to operate. You will need to connect the Solaris via XLR connection to a

preamp or mixer channel strip that supplies +48V phantom power (phantom

power shares the same XLR cable as the audio from the microphone). In order

to avoid loud pops that can damage components like speakers and

microphones, always perform the following steps (in the order listed) when

connecting the mic and/or cable:

1.Turn the gain on your preamp and/or mixer all the way down

2.Make sure that phantom power is disengaged

3.Connect the microphone via a high-quality XLR cable

4.Engage phantom power

5.Turn up the gain on your preamp and/or mixer

Before disconnecting the mic and/or cable:

1.Turn the gain on your preamp and/or mixer all the way down

2.Disengage phantom power

3.Disconnect the microphone via a high-quality XLR cable

Applications

The Solaris’s clean-sounding technology is combined with an all-brass

capsule to produce a smooth bottom and vintage tone that’s perfect for

capturing and enhancing great vocals. The Solaris is also great for most other

instruments and applications—including amplified guitar or bass.

Termékspecifikációk