Használati útmutató Makita DUA301Z

Makita sövénynyíró DUA301Z

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita DUA301Z (24 oldal) a sövénynyíró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 5.0 csillagra

Letöltés PDF

Oldal 1/24

INSTRUCTION MANUAL

Cordless Telescopic Pole Saw

DUA301

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUA301

Overall length (without guide bar) 2,530 - 3,760 mm

Rated voltage D.C. 36 V

Net weight 7.8 kg*1

*2 7.8 - 8.5 kg

Standard guide bar length 300 mm

Recommended guide bar

length

with 90PX 250 - 300 mm

with 91PX 250 - 300 mm

Applicable saw chain type

(refer to the table below)

90PX

91PX

Standard sprocket Number of teeth 6

Pitch 3/8″

Chain speed 0 - 20 m/s

(0 - 1,200 m/min)

Chain oil tank volume 160 cm

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydi󰀨erfromcountrytocountry.

*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar, chain, and shoulder harness,

according to EN ISO11680-1.

*2:Thelightestandheaviestcombinationofweight,accordingtoEPTA-Procedure01/2014.Theweightmaydi󰀨er

depending on the attachment(s), including the battery cartridge.

Applicable battery cartridge and charger

Battery cartridge BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Recommended portable power pack

Portable power pack PDC01 / PDC1200

• The portable power pack(s) listed above may not be available depending on your region of residence.

• Before using the portable power pack, read instruction and cautionary markings on the portable power pack.

Saw chain, guide bar, and sprocket combination

Saw chain type 90PX

Number of drive links 46

Guide bar Guide bar length 300 mm

Cutting length 296 mm

Pitch 3/8″

Gauge 1.1 mm

Type Sprocket nose bar

Sprocket Number of teeth 6

Pitch 3/8″

3 ENGLISH

Saw chain type 91PX

Number of drive links 46

Guide bar Guide bar length 300 mm

Cutting length 296 mm

Pitch 3/8″

Gauge 1.3 mm

Type Sprocket nose bar

Sprocket Number of teeth 6

Pitch 3/8″

WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay

result.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Do not expose to moisture.

Read instruction manual.

Wear a helmet, goggles and ear protection.

Wear protective gloves.

Wear sturdy boots with nonslip soles.

Steeltoed safety boots are recommended.

Beware of electrical lines, risk of electrical

shock.

Keep distance at least 15 m.

Maximum permissible cut length

Direction of chain travel

Chain oil tank

Hotsurfaces-Burnstongersorhands.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive on

waste electrical and electronic equipment and on

accumulators and batteries and waste accumu-

lators and batteries, as well as their adaptation to

national law, waste electrical equipment, batteries

and accumulators should be stored separately

and delivered to a separate collection point for

municipal waste, operating in accordance with the

regulations on environmental protection.

This is indicated by the symbol of the crossed-

out wheeled bin placed on the equipment.

Guaranteed sound power level according

to EU Outdoor Noise Directive.

Sound power level according to Australia

NSW Noise Control Regulation.

Intended use

The tool is intended for pruning branches and limbs.

Noise

The typical A-weighted noise level determined accord-

ing to ISO22868(ISO11680-1):

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o󰀨 and when it is running idle in addition to the

trigger time).

Termékspecifikációk

Márka:	Makita
Kategória:	sövénynyíró
Modell:	DUA301Z
Termék színe:	Green, Steel
Tömeg:	8500 g
Áramforrás:	Akkumulátor
Feszültség:	18 V
Hossz:	4058 mm
Maximális ágvastagság:	- mm