Használati útmutató Makita DUH604SRT

Makita sövénynyíró DUH604SRT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita DUH604SRT (20 oldal) a sövénynyíró kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
INSTRUCTION MANUAL
Cordless Hedge Trimmer
DUH604S
DUH754S
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUH604S DUH754S
Blade length 600 mm 750 mm
Strokes per minute 2,000 / 3,600 / 4,400 min
-1
Overall length 1,061 mm 1,200 mm
Rated voltage D.C. 18 V
Net weight 3.4 - 3.9 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionofresidence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Recommended battery adapter
Batteryadapter PDC01
• Thebatteryadapter(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingthebatteryadapter,readinstructionandcautionarymarkingsonthebatteryadapter.
Symbols
Thefollowingsshowthesymbolsusedfortheequipment.
Besurethatyouunderstandtheirmeaningbeforeuse.
Read instruction manual.
Do not expose to moisture.
Beware of pinching.
Wearsafetyglasses.
Ni-MH
Li-ion
OnlyforEUcountries
Donotdisposeofelectricequipmentor
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
EquipmentandBatteriesandAccumulators
and Waste Batteries and Accumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for trimming hedges.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-4-2:
Model DUH604S
Soundpressurelevel(L
pA):79.3dB(A)
Soundpowerlevel(L
WA):90.3dB(A)
Uncertainty(K):3dB(A)
Model DUH754S
Soundpressurelevel(L
pA):80.6dB(A)
Soundpowerlevel(L
WA):91.6dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
NOTE:Thedeclarednoiseemissionvalue(s)has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclarednoiseemissionvalue(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841-4-2:
Model DUH604S
Vibrationemission(a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
Model DUH754S
Vibrationemission(a
h):2.5m/s2 or less
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless)powertool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
youtolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic elds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
asadustmask,non-skidsafetyshoes,hardhator
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.Carryingpowertoolswith
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.

Termékspecifikációk

Márka: Makita
Kategória: sövénynyíró
Modell: DUH604SRT

Szüksége van segítségre?

Ha segítségre van szüksége Makita DUH604SRT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók sövénynyíró Makita

Makita

Makita DUM168 Útmutató

29 Március 2025
Makita

Makita BUM166 Útmutató

29 Március 2025
Makita

Makita DUH604S Útmutató

22 December 2024
Makita

Makita UH5520 Útmutató

4 Október 2024
Makita

Makita UN5400 Útmutató

28 Szeptember 2024
Makita

Makita UH5570 Útmutató

20 Szeptember 2024
Makita

Makita DUH604SRT Útmutató

16 Szeptember 2024
Makita

Makita DUH523RT Útmutató

11 Szeptember 2024
Makita

Makita DUH551 Útmutató

24 Augusztus 2024
Makita

Makita EN7350SH Útmutató

8 Augusztus 2024

Útmutatók sövénynyíró

Legújabb útmutatók sövénynyíró

ID-Tech

ID-Tech EHS 650 XR Útmutató

10 Április 2025
Gardena

Gardena ComfortCut 600-55 Art. 9834 Útmutató

8 Április 2025
Echo

Echo HC-341ES Útmutató

7 Április 2025
Gardena

Gardena EasyCut 42 - 8870 Útmutató

5 Április 2025
Alpina

Alpina AHT 500 E Útmutató

3 Április 2025
Kingcraft

Kingcraft KCH 550 Útmutató

3 Április 2025
ATIKA

ATIKA HB72 Útmutató

3 Április 2025
Anova

Anova CG2360 Útmutató

3 Április 2025
Einhell

Einhell HEC 410 Útmutató

30 Március 2025
Husqvarna

Husqvarna 325HD60 X-series Útmutató

26 Március 2025