Használati útmutató Makita DUR368AZ

Makita vágógép DUR368AZ

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita DUR368AZ (28 oldal) a vágógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/28

INSTRUCTION MANUAL

Cordless Grass Trimmer

DUR368A

DUR368L

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUR368A DUR368L

Handle type Bike handle Loop handle

No load speed

(at each rotation speed level)

Cutter blade / Nylon cutting

head / Plastic blade

3: 6,500 min-1

2: 5,300 min-1

1: 3,500 min-1

Overall length

(without cutting tool)

1,758 mm

Nylon cord diameter 2.0 - 2.4 mm

Applicable cutting tool and

cutting diameter

3-tooth blade

(P/N: 195298-3)

230 mm

4-tooth blade

(P/N: B-14118)

230 mm

8-tooth blade

(P/N: B-14130)

230 mm

Nylon cutting head

(P/N: 198893-8)

350 mm

Plastic blade

(P/N: 198383-1)

255 mm

Rated voltage D.C. 36 V

Net weight 4.1 - 4.7 kg 3.9 - 4.5 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge, battery adapter and charger

Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Battery Adapter BAP182 / BL36120A

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH

• Some of the battery cartridges, battery adapters and chargers listed above may not be available depending on

your region of residence.

WARNING: Only use the battery cartridges, battery adapters and chargers listed above. Use of any

otherbatterycartridges,batteryadaptersandchargersmaycauseinjuryand/orre.

Noise

Applicable standard : ISO22868

Model DUR368A

Cutting tool Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

LpA dB(A)

Uncertainty (K)

dB(A)

LWA dB(A)

Uncertainty (K)

dB(A)

4-tooth blade 74.7 1.0 89.2 1.6

Nylon cutting head 76.4 1.6 89 1.0

Plastic blade 75.1 0.3 86 0.4

3 ENGLISH

Model DUR368L

Cutting tool Sound pressure level (LpA)

dB(A)

Sound power level (LWA)

dB(A)

LpA dB(A)

Uncertainty (K)

dB(A)

LWA dB(A)

Uncertainty (K)

dB(A)

4-tooth blade 74.7 1.0 89.2 1.6

Nylon cutting head 76.4 1.6 89 1.0

Plastic blade 75.1 0.3 86 0.4

• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB

(A). Wear ear protection.

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can differ from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched off and when it is running idle in addition to the trigger time).

Vibration

Applicable standard : ISO22867

Model DUR368A

Cutting tool Left hand Right hand

ah,W (m/s2) Uncertainty K

(m/s2)

ah,W (m/s2) Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

Nylon cutting head 2.5 1.5 2.5 1.5

Plastic blade 2.5 1.5 2.5 1.5

Model DUR368L

Cutting tool Left hand Right hand

ah,W (m/s2) Uncertainty K

(m/s2)

ah,W (m/s2) Uncertainty K

(m/s2)

4-tooth blade 2.5 1.5 2.5 1.5

Nylon cutting head 2.5 1.5 2.5 1.5

Plastic blade 2.5 1.5 2.5 1.5

NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

WARNING: The vibration emission during actual use of the power tool can differ from the declared

value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched off and when it is running idle in addition to the trigger time).

Termékspecifikációk

Márka:	Makita
Kategória:	vágógép
Modell:	DUR368AZ
Tömeg:	4100 g
Típus:	Szegélynyíró
Áram:	- W
Áramforrás:	Akkumulátor
Feszültség:	18 V
Hangteljesítményszint:	89 dB
Megfelelő nyomásszint:	76.4 dB
Fordulatszám:	6500 RPM
Rezgéskibocsátás:	2.5 m/mp²
Fej típusa:	Nejlon szál
Vágási átmérő (max.):	- mm
Cserélhető akkumulátor:	Igen
Nyél típusa:	U alakú fogó
Hangnyomásszint elérés:	1.6 dB