Használati útmutató Makita GA7050

Makita csiszológép GA7050

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Makita GA7050 (16 oldal) a csiszológép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA7050
GA7050R
GA9050
GA9050R
010638
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA7050 GA7050R GA9050 GA9050R
Depressed center wheel diameter 180 mm 180 mm 230 mm 230 mm
Max. wheel thickness 6.5 mm 6.5 mm 6.5 mm 6.5 mm
Spindle thread M14 or 5/8" (country specific)
No load speed (n0 ) / Rated speed (n) 8,500 (min
-1) 8,500 (min-1) 6,600 (min-1) 6,600 (min-1)
Overall length 432 mm 455 mm 432 mm 455 mm
Net weight 4.5 kg 4.6 kg 4.7 kg 4.8 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-8
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For model GA7050, GA9050
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause
voltage fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.22 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model GA7050, GA7050R, GA9050, GA9050R
Sound pressure level (L
pA) : 94 dB (A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA7050, GA7050R
Work mode : surface grinding
Vibration emission (ah,AG) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : disc sanding
Vibration emission (ah,DS) : 4.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
Model GA9050, GA9050R
Work mode : surface grinding
Vibration emission (ah,AG) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7050, GA7050R, GA9050,
GA9050R
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.

Termékspecifikációk

Márka: Makita
Kategória: csiszológép
Modell: GA7050

Szüksége van segítségre?

Ha segítségre van szüksége Makita GA7050, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók csiszológép Makita

Makita

Makita 9500D Útmutató

28 Március 2025
Makita

Makita GA9020SF Útmutató

28 Március 2025
Makita

Makita 9528NB Útmutató

19 Március 2025
Makita

Makita 9562CVR Útmutató

13 Január 2025
Makita

Makita 9558PB Útmutató

23 December 2024
Makita

Makita GA7063RX02 Útmutató

2 Október 2024
Makita

Makita GA013GD101 Útmutató

2 Október 2024
Makita

Makita 9563 Útmutató

30 Szeptember 2024
Makita

Makita GA7062 Útmutató

24 Szeptember 2024
Makita

Makita 9059S Útmutató

23 Szeptember 2024

Útmutatók csiszológép

Legújabb útmutatók csiszológép

Einhell

Einhell BT-MG 160 KIT Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 600 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 2000 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-WS 750 Set Útmutató

30 Március 2025
NEO Tools

NEO Tools 14-014 Útmutató

28 Március 2025
Einhell

Einhell TC-WS 125 Útmutató

25 Március 2025
Parkside

Parkside PEXS 270 A1 Útmutató

13 Január 2025
Tryton

Tryton TDS125B Útmutató

12 Január 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Útmutató

11 Január 2025
Bosch

Bosch GWS 18V-8 Professional Útmutató

6 Január 2025