Használati útmutató Marmitek Connect AD12
Marmitek
audio/videó-konverter
Connect AD12
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Marmitek Connect AD12 (41 oldal) a audio/videó-konverter kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 3.9 csillagra
Oldal 1/41

Package content
1x Audio converter
1x RCA (cinch) audio cable, 90 cm
1x 5V USB-A Power adapter
1x Power cable, black, 100 cm
1x Quick guide
Connect AD12
Digital audio converter
Convert your analogue
stereo signal into a digital
audio signal

Safety instructions
Please read these instructions thoroughly before you use
the device and keep them for future reference.
• Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of children.
• Connect the adapter to the mains only after you have verified
that the line voltage corresponds to the value specified on the
type plates.
• Never connect a power adapter if it's damaged. In such cases,
please contact your supplier.
• Disconnect the AC/DC power adapter from the mains when
this device is not in use for prolonged time.
• Never open the product: the device may contain parts with
deadly voltage.
• Repairs or service should only be performed by qualified
personnel.
• Record players need special phono pre-amplification to make
vinyl records sound right. Many turntables have this built in,
some do not. This product does not have a built-in phono
preamp.
Installation
• We recommend that you switch off your equipment before
connecting cables in order to prevent any of the devices being
damaged.

• At all times, avoid bending the optical (Toslink) cable as it is
very delicate.
1. Connect the Audio Source to the analog input[1] on the
Connect AD12 RCA audio cable. ™ using the
2. Connect the Audio Amplifier to the digital audio output [2]
on the Connect AD12 a Coaxial or Optical audio ™ using
cable.
3. Connect the power adapter [3] and plug into the electrical
socket.
4. Set the switch [4] in the ON position and check that the
audio connection works.
Audio Source [1]
[2] *Audio amplifier, soundbar or
active speakers
[3] [4]
Termékspecifikációk
Márka: | Marmitek |
Kategória: | audio/videó-konverter |
Modell: | Connect AD12 |
Szüksége van segítségre?
Ha segítségre van szüksége Marmitek Connect AD12, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók audio/videó-konverter Marmitek
31 Augusztus 2024
4 Augusztus 2024
30 Július 2024
28 Július 2024
27 Július 2024
27 Július 2024
25 Július 2024
24 Július 2024
21 Július 2024
15 Július 2024
Útmutatók audio/videó-konverter
- audio/videó-konverter Ferrofish
- audio/videó-konverter LevelOne
- audio/videó-konverter Cambridge
- audio/videó-konverter SWIT
- audio/videó-konverter Epcom
- audio/videó-konverter Genie
- audio/videó-konverter Audiotec Fischer
- audio/videó-konverter Audison
- audio/videó-konverter KanexPro
- audio/videó-konverter I-TEC
- audio/videó-konverter Pro-Ject
- audio/videó-konverter Micro Connect
- audio/videó-konverter Wavtech
- audio/videó-konverter CYP
- audio/videó-konverter Jung
Legújabb útmutatók audio/videó-konverter
8 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
29 Március 2025
29 Március 2025
26 Március 2025