Használati útmutató Maytag W10113902

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Maytag W10113902 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.0 csillagra

Oldal 1/4
FILLER STRIP INSTALLATION INSTRUCTIONS
for Slide-In Ranges
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
#2 Phillips or #2 square tip screwdriver
Measuring tape
Electric drill
¹⁄" (3 mm) drill bit
Pliers
Marker or pencil
Parts Supplied
Filler strip
2 Mounting brackets
4 #8–18 x ¹⁄₂" screws
NOTE: This filler strip is used only when the opening depth for the
slide-in range is deeper than the recommended opening depth.
Install Filler Strip
1. The filler strip can be used to fill gaps of 2⁵⁄₈" (67 mm),
2¹⁄₄" (57 mm), or 1¹⁄₂" (38 mm).
It is recommended to mount the filler strip flush to the
countertop but it is not necessary.
2. Determine the approximate gap between the back of the
countertop cutout and slide-in range by measuring the
distance from the back of the countertop cutout to the front of
the countertop and subtracting 22³⁄" (57.8 cm) from the total.
3. Rotate the filler strip to determine the filler strip depth that
best fills the gap.
4. Align the filler strip edge to the back of the countertop cutout
and the countertop cutout sides. To keep the filler strip
straight, check that the back edge of the filler strip is flush to
the back wall of the countertop cutout.
A. 2⁄₈" (67 mm)
B. 2¹⁄₄" (57 mm)
C. 1¹⁄₂" (38 mm)
A
B
C
A. Filler strip
B. Countertop
C. Countertop cutout
B
A
B
C
W10114233

Termékspecifikációk

Márka: Maytag
Kategória: nincs kategorizálva
Modell: W10113902

Szüksége van segítségre?

Ha segítségre van szüksége Maytag W10113902, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek