Használati útmutató Meliconi Pratico 2.1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Meliconi Pratico 2.1 (6 oldal) a távirányító kategóriában. Ezt az útmutatót 32 ember találta hasznosnak.

/ 6 PDF

Pratico 2.1

Thank you for choosing a Meliconi remote control.

The Pratico 2.1 remote control is designed to command and a DECODER (satellite or digital terrestriala TV).

IMPORTANT!When the remote control is set to control only device (example: TV), all the buttons will control that one

device; whilst when it is set to control 2 devices (TV + DECODER), e buttons will control the TV, onlythV+V-

whilst the other buttons will control the DECODER. (see chapter COMBINED KEYPAD)

Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.

By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.

It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the

package) in order to download the latest information to its activation.

The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio

frequency (e.g. voice commands and pointers) are not supported.

The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.

The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03

package. Insert with the correct polarity as shown in gure.

DO NOT use batteries. rechargeable

BATTERIES TEST:Press and hold the 5 button and check that the LED remains on

continuously until the button is released. If the light is o or blinks, the inserted batteries are low,

therefore they need replacement.

WARNING:

As the remote control is capable of controlling 2 devices, during setup you must select the operation modethen dene which ;

device you want to control. (TV / STB)

To select the operation mode, press the button quickly and repeatedly until the LED corresponding to

the device you want to operate is switched on. ( led / led) TV = red STB = green

Before using the remote control, for each device you wish to control, it is to set a it matched. essentialspecic code,

Identify the specic code and set it into the remote control using one of the following ways:

MANUAL

SEARCH

SMARTPHONE

TABLET -WEB

ACTIVATION OF REMOTE CONTROL

SELECTION OF OPERATING MODE

Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control

INSERTING THE BATTERIES

SAFETY WARNINGS

The remote control and batteries should not be exposed to excessive heat such as sunlight, re

or the like.

The product . Keep out of reach of children or domestic animals. is not a toy

Keep this booklet for future reference

Termékspecifikációk