Használati útmutató Mercusys MS106LP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mercusys MS106LP (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 3.7 csillagra

Oldal 1/3
© 2023 MERCUSYS 7107500255 REV1.0.0
LED Explanation Switch Explanation
O: Ports run at100/10 Mbps and support PoE power supply up to 100m away.
On: Ports run at 10 Mbps and support PoE power supply up to 250m away.
Extend
MS106LP
Quick Installation Guide
For technical support, replacement services, user guides, and other
information, please visit https://www.mercusys com/support/..
Connection
PC
PoE Ports (1-4)
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Non-PoE ports (ports 5-6) are recommended to connect to uplink devices like routers.
3. Ports 1-2 have higher priority than other ports in transmitting data if network
congestion occurs. It is recommended to connect key network devices (network
cameras, APs, etc.) to ports 1-2.
Notes:
Internet
IP Camera AP IP Phone
Powered Device (PD)
Power
On: The power is on
O: The power is o
Link/Act Status
On: Link present but no activity
Flashing: Transmitting or receiving data
O: No link
PoE Status
On: The port is providing PoE power
O: The port is not providing PoE power
O: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch nds that the PD works abnormally, the switch will reboot it.
Recovery
O: Ports can transmit data with each other.
On: Ports 1-4 cannot transmit data with each other. They can transmit data only with the
uplink ports (ports 5-6).
Isolation
Ethernet Ports (1-6)
Power Adapter

Termékspecifikációk

Márka: Mercusys
Kategória: nincs kategorizálva
Modell: MS106LP

Szüksége van segítségre?

Ha segítségre van szüksége Mercusys MS106LP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek