Használati útmutató Metra 99-6000

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Metra 99-6000 (2 oldal) a Autós készlet kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
99-6000
INSTALLATION
INSTRUCTIONS
KIT COMPONENTS
TOOLS REQUIRED
Cutting tool
Panel removal tool
Phillips screwdriver
KIT FEATURES
Pocket
provisions
Radio Housing
34
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with those screws
previously removed in step #1.
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
DIN HEAD UNITS: Slide the DIN cage into the kit and secure by bending the metal locking
tabs down. Slide the aftermarket head unit into the cage until secure.
ALL VEHICLES
2
3
APPLICATIONS
CHRYSLER / DODGE / EAGLE / JEEP
PLYMOUTH VEHICLES 1974-00
(SEE INSIDE FOR SPECIFIC APPLICATIONS)
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 230701

Termékspecifikációk

Márka: Metra
Kategória: Autós készlet
Modell: 99-6000

Szüksége van segítségre?

Ha segítségre van szüksége Metra 99-6000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek