Használati útmutató Microchip ATA8350

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip ATA8350 (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/18
ATA8350
ATA8350 Demo and Evaluation Kit
Introduction
This user’s guide describes the use of the ATA8350 Demo and Evaluation kit for the ATA8350 Ultra-Wideband (UWB)
transceiver device. This kit includes at least two different UWB nodes, each using a SAM Cortex
®-M0 MCU to control
the ATA8350 device. The Prover and Verifier nodes are set up as follows:
Prover node – Must start before the Verifier node, and responds with a telegram once the verifier telegram is
received. The measurement cycle finishes when the verifier receives the response telegram or when a timeout
occurs.
Verifier node – Shows the distance measurement data for distance-bounding measurements (single shot
measurement) or localization (averaged measurement).
Demo software for distance measurements and data telegram transfer is available for this demo kit. In addition, this
kit has an evaluation and a test software package.
The ATA8350 Demo and Evaluation kit comes in two variants:
Variant A – Comes with one Prover node
Variant B – Comes with a maximum of five Prover nodes
It also includes software applications for demo, testing and evaluation.
© 2021 Microchip Technology Inc.
and its subsidiaries
User Guide DS50003166A-page 1

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: ATA8350

Szüksége van segítségre?

Ha segítségre van szüksége Microchip ATA8350, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek