Használati útmutató Microchip ATMXT144UD-SL
Oldalak 12 Engels nincs kategorizálva
Olvassa el ingyen online a(z) Microchip ATMXT144UD-SL használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 14 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
2022 Microchip Technology Inc. and its subsidiariesProduct BriefDS40002447A-page 1
mXT144UD-AMTSL/
mXT144UD-AMBSL 1.0
Description
The mXT144UD-AMxSL 1.0 uses a unique charge-transfer acquisition engine to implement Microchip’s patented capacitive
sensing method. Coupled with a state-of-the-art CPU, the entire sensor sensing solution can measure, classify and track a
number of individual finger touches with a high degree of accuracy in the shortest response time.The mXT144UD-AMxSL 1.0
allows for both mutual and self capacitance measurements, with the self capacitance measurements being used to augment the
mutual capacitance measurements to produce reliable touch information.
Automotive Applications
maXTouch
®
Adaptive Sensing Technology
Keys
Touch Sensor Technology
•On-cell/touch-on display support including OLED,TFT
and LCD (ITPS, IPS)
•Discrete/out-cell support including glass and PET film-
based sensors
•Synchronization with display refresh timing capability
•Support for slider touch sensor patterns designed
following Microchip guidelines(review of designs by
Microchip or a Microchip-qualified touch sensor
module partner is recommended)
Front Panel Material
Touch Performance
•Moisture/Water Compensation
-No false touch with condensationor water drop
up to 22mm diameter
-One-finger tracking with condensation or water
drop up to 22mm diameter
•Mutual capacitance and self capacitance
measurements supported for robust touch detection
•P2P mutual capacitance measurements supported for
extra sensitive multi-touch sensing
•Noise suppression technology to combat ambient and
power-line noise
•Burst Frequency
-Flexible and dynamic Tx burst frequency selection
to reduce EMC disturbance
-Configurable Tx waveform shaping to reduce
emissions
•Scan Speed
-Typical report rate for 5 touches 120Hz (subject
to configuration)
-Initial touch latency <6 ms for first touch from idle
(subject to configuration)
•AEC-Q100 Qualified
•CISPR25 compliant(for both mutual and self
capacitance measurements)
•Up to 12 X (transmit) lines and 12 Y (receive) linesfor
use by a slider and/or key array
•A maximum of 144 nodes can be allocated to the
touch sensor
•Slider length 936 mm, assuming a sensor electrode
pitch of 6.5mm. Other lengths are possible with
different electrode pitches and appropriate sensor
material
•Multiple touch support with up to 10 concurrent
touches tracked in real time
•Up to 16 nodes can be allocated as mutual
capacitance sensor keys in addition to the slider,
defined as 1 key array (subject to availability of X and
Y lines and other configurations)
•Adjacent Key Suppression (AKS) technology is
supported for false key touch prevention
•Works with PET or glass, including curved profiles
(configuration and stack-up to be approved by
Microchip or a Microchip-qualified touch sensor
module partner)
•10mm glass (or 5mm PMMA) with bare finger
(dependent on sensor size, touch size, configuration
and stack-up)
•6mm glass (or 3mm PMMA) with multi-nger 5mm
glove (2.7mm PMMA equivalent) (dependent on
sensor size, touch size, configuration and stack-up)
-Up to 240 V
PP
between 1Hz and 1kHz sinusoidal
waveform (no touches)
-Up to 20 V
PP
between 1kHz and 1MHz
sinusoidal waveform
maXTouch 144-node Touch Slider Controller
Product Brief
Termékspecifikációk
| Márka: | Microchip |
| Kategória: | nincs kategorizálva |
| Modell: | ATMXT144UD-SL |
Szüksége van segítségre?
Ha segítségre van szüksége Microchip ATMXT144UD-SL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Microchip
Microchip ATSAMHA1G17A Útmutató Microchip ATMXT1664TD Útmutató Microchip ATMEGA162 Útmutató Microchip ATMXT1296M1 Útmutató Microchip ATECC608C-TCSM Útmutató Microchip ATECC608C-TNGTLS Útmutató Microchip ATECC508A Útmutató Microchip ATA5749C Útmutató