Használati útmutató Microchip MCP1642
Oldalak 32 Engels nincs kategorizálva
Olvassa el ingyen online a(z) Microchip MCP1642 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 10 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
2014 Microchip Technology Inc.DS20005253A-page 1
MCP1642B/D
Features
•Up to 96% Typical Efficiency
•1.8A Typical Peak Input Current Limit:
- IOUT > 175mA @ 1.2V VIN, 3.3V VOUT
- IOUT > 600mA @ 2.4V VIN, 3.3V VOUT
- IOUT > 800mA @ 3.3V VIN, 5.0V VOUT
- IOUT > 1A @ VIN > 3.6V, 5.0V VOUT
•Low Start-Up Voltage: 0.65V, typical 3.3V V
OUT
@ 1 mA
•Low Operating Input Voltage: 0.35V, typical 3.3V
VOUT @ 1mA
•Output Voltage Range:
-Reference Voltage, VFB = 1.21V
-1.8V to 5.5V for the adjustable device option
-1.8V, 3.0V, 3.3V and 5.0V for fixed V
OUT
options
•Maximum Input Voltage VOUT < 5.5V
•PWM Operation: 1MHz
-Low Noise, Anti-Ringing Control
•Power Good Open-Drain Output
•Internal Synchronous Rectifier
•Internal Compensation
•Inrush Current Limiting and Internal Soft-Start
•Selectable, Logic-Controlled Shutdown States:
-True Load Disconnect Option (MCP1642B)
-Input-to-Output Bypass Option (MCP1642D)
•Shutdown Current (All States): 1 µA
•Overtemperature Protection
•Available Packages:
-8-Lead MSOP
-8-Lead 2x3 DFN
Applications
•One, Two and Three-Cell Alkaline, Lithium
Ultimate and NiMH/NiCd Portable Products
•Single-Cell Li-Ion to 5V Converters
• PIC® MCU Power
•USB Emergency Backup Charger from Batteries
•Personal Medical Products
•Wireless Sensors
•Hand-Held Instruments
•GPS Receivers
•+3.3V to +5.0V Distributed Power Supply
General Description
The MCP1642B/D devices are compact,
high-efficiency, fixed-frequency, synchronous step-up
DC-DC converters. This family of devices provides an
easy-to-use power supply solution for applications
powered by either one-cell, two-cell, or three-cell
alkaline, Ultimate Lithium, NiCd, NiMH, one-cell Li-Ion
or Li-Polymer batteries.
Low-voltage technology allows the regulator to start-up
without high inrush current or output voltage overshoot
from a low voltage input. High efficiency is
accomplished by integrating the low-resistance
N-Channel Boost switch and synchronous P-Channel
switch. All compensation and protection circuitry are
integrated to minimize the number of external
components. An open-drain Power Good output is
provided to indicate when the output voltage is within
10% of regulation and facilitates the interface with an
MCU. For standby applications, MCP1642B provides a
“true output disconnect” from input to output while in
shutdown (EN = GND). An additional device option
(MCP1642D) is available and connects “input to output
bypass” while in shutdown. Both options consume less
than 1µA of input current.
For the adjustable (ADJ) device options, the output
voltage is set by a small external resistor divider. Fixed
VOUTdevice options do not require external divider
resistors. Two package options, 8-lead MSOP and 8-
lead 2x3 DFN, are available.
Package Types
PG
NC
VOUT
SGND
PGND
1
2
3
4
8
7
6
5SW
VIN
EN
EP
9
PGND
SGND
PG
VFB
VOUT
SGND
PGND
1
2
3
4
8
7
6
5 SW
VIN
EN
EP
9
6
1
2
3
8VIN
PGND
EN
VFB
PG
7SGND
5
4SW
VOUT
6
1
2
3
8VIN
EN
NC
PG
7
5
4 SWVOUT
MCP1642B/D-xx
MSOP
MCP1642B/D-xx
2x3 DFN*
MCP1642B/D-ADJ
MSOP
MCP1642B/D-ADJ
2x3 DFN*
* Includes Exposed Thermal Pad (EP); see Table 3-1.
1.8A Input Current Switch, 1MHz Low-Voltage Start-Up
Synchronous Boost Regulator
Termékspecifikációk
| Márka: | Microchip |
| Kategória: | nincs kategorizálva |
| Modell: | MCP1642 |
Szüksége van segítségre?
Ha segítségre van szüksége Microchip MCP1642, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Microchip
Microchip PIC24FJ512GB606 Útmutató Microchip MCP1826 Útmutató Microchip ATF1508AS Útmutató Microchip ATSAMDA1J16B Útmutató Microchip ATF1500AL Útmutató Microchip AT42QT1085 Útmutató Microchip MCP1825S Útmutató Microchip MCP1825 Útmutató