Használati útmutató Microchip MCP19115

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip MCP19115 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.2 csillagra

Oldal 1/24
2014 Microchip Technology Inc. DS20005270A-page 1
MCP19114/5
This document includes the programming
specifications for the following devices:
• MCP19114
• MCP19115
1.0 PROGRAMMING THE
MCP19114 AND MCP19115
DEVICES
The MCP19114/5 devices are programmed using a serial
method. The Serial mode will allow these devices to be
programmed while in the user’s system. These
programming specifications apply to all of the above
devices in all packages.
1.1 Hardware Requirements
This family of devices requires one power supply for
VIN, see Table 6-1. The VDD that is used to bias all
internal circuitry is internally generated and regulated
to 5V. Analog circuitry is powered from internally
generated AVDD and is regulated to 4V.
1.2 Program/Verify Mode
The Program/Verify mode for this family of devices
allows programming the user program memory, the
user ID locations, the Calibration Word and the
Configuration Word.
FIGURE 1-1: PIN DIAGRAM – 24-PIN QFN (MCP19114)
1
2
3
4
5
6 13
7
8
9
10
11
12
14
15
16
17
18
23
22
21
20
19
24
EXP-25
GPA0/AN0/TEST_OUT
GPA1/AN1/CLKPIN
GPA2/AN2/T0CKI/INT
GPA3/AN3
GPA7/SCL/ICSPCLK
GPA6/CCD/ICSPDAT
GPA5/MCLR/TEST_EN
GPB0/SDA
DESATN
DESATP/ISOUT
ISP
ISN
IP
AGND
PGND
SDRV
PDRV
VDR
GPB1/AN4/VREF2
ICOMP
IFB
VS
VIN
VDD
MCP19114
MCP19114/5 Flash Memory Programming Specification

Termékspecifikációk

Márka: Microchip
Kategória: nincs kategorizálva
Modell: MCP19115

Szüksége van segítségre?

Ha segítségre van szüksége Microchip MCP19115, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek