Használati útmutató Microchip MCP39F511
Microchip
nincs kategorizálva
MCP39F511
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Microchip MCP39F511 (62 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.0 csillagra
Oldal 1/62

2015 Microchip Technology Inc. DS20005393B-page 1
MCP39F511
Features
• Power Monitoring Accuracy Capable of 0.1%
Error Across 4000:1 Dynamic Range
• Built-In Calculations on Fast 16-Bit Processing
Core
- Active, Reactive, Apparent Power
- True RMS Current, RMS Voltage
- Line Frequency, Power Factor
• 64-bit Wide Import and Export Active Energy
Accumulation Registers
• 64-bit Four Quadrant Reactive Energy
Accumulation Registers
• Signed Active and Reactive Power Outputs
• Dedicated Zero Crossing Detection (ZCD) Pin
Output with Less than 200 µs Latency
• Dedicated PWM Output Pin with Programmable
Frequency and Duty Cycle
• Automatic Event Pin Control through Fast Voltage
Surge Detection Less than 5 ms Delay
• Two Wire Serial Protocol with Selectable Baud
Rate Up to 115.2 kbps using Universal
Asynchronous Receiver/Transmitter (UART)
• Four Independent Registers for Minimum and
Maximum Output Quantity Tracking
• Fast Calibration Routines and Simplified
Command Protocol
• 512 Bytes User-Accessible EEPROM through
Page Read/Write Commands
• Low-Drift Internal Voltage Reference, 10 ppm/°C
Typical
• 28-lead 5x5 QFN Package
• Extended Temperature Range -40°C to +125°C
Applications
• Power Monitoring for Home Automation
• Industrial Lighting Power Monitoring
• Real-Time Measurement of Input Power for
AC/DC Supplies
• Intelligent Power Distribution Units
Description
The MCP39F511 is a highly integrated, complete
single-phase power-monitoring IC designed for
real-time measurement of input power for
AC/DC power supplies, power distribution units,
consumer and industrial applications. It includes
dual-channel Delta-Sigma ADCs, a 16-bit calculation
engine, EEPROM and a flexible 2-wire interface. An
integrated low-drift voltage reference with 10 ppm/°C in
addition to 94.5 dB of SINAD performance on each
measurement channel allows for better than 0.1%
accurate designs across a 4000:1 dynamic range.
Package Types
1
25
2
3
4
5
8 9 10 11 12
21
20
19
18
17
28 27 26 24
EVENT1
NC
UART_RX
COMMONA
NC
NC
NC
AVDD
UART_TX
RESET
DVDD
DGND
MCLR
EP
29
6
7
OSCI
OSCO
13 14
COMMONB
PWM
16
15
23 22
REFIN+/OUT
ZCD
I1+
I1-
V1-
V1+
AN_IN
AGND
DGND
EVENT2
DR
MCP39F511
5x5 QFN*
*Includes Exposed Thermal Pad (EP);
see Table 3-1.
Power-Monitoring IC with Calculation and Energy Accumulation
Termékspecifikációk
| Márka: | Microchip |
| Kategória: | nincs kategorizálva |
| Modell: | MCP39F511 |
Szüksége van segítségre?
Ha segítségre van szüksége Microchip MCP39F511, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Microchip
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
Útmutatók nincs kategorizálva
- nincs kategorizálva LECO
- nincs kategorizálva Fimer
- nincs kategorizálva Veritas
- nincs kategorizálva GoClever
- nincs kategorizálva Columbus
- nincs kategorizálva Robust
- nincs kategorizálva Yamaha
- nincs kategorizálva Heckler
- nincs kategorizálva Datalogic
- nincs kategorizálva Reloop
- nincs kategorizálva Hager
- nincs kategorizálva Plant Craft
- nincs kategorizálva CTA Digital
- nincs kategorizálva Brandt
- nincs kategorizálva Bauhn
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025