Használati útmutató Midland MicroMobile MXTA24

Midland rádió MicroMobile MXTA24

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Midland MicroMobile MXTA24 (1 oldal) a rádió kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.1 csillagra

Oldal 1/1
5900 Parretta Drive ● KANSAS CITY, MO ● 64120
PHONE: (816) 241-8500 ● FAX: (816) 241-5713
EMAIL: mail@midlandradio.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
10/16/2022
MXTA24 Assembly Diagram
1. The MXTA24 is designed for mounng brackets or surfaces 1/8” to 1/4" thick. Thinner materials may
require some stainless washer(s) below the surface for proper spacing.
2. The MXTA24 can be installed directly in a 3/8” hole, or in the 5/8” hole on some brackets using the
included nylon spacer, part B. The two ears on Part D help keep the assembly centered in a 3/4" hole.
3. Part D should be installed on part E before inserng from below the bracket or mounng surface.
4. Part B is only needed if using a bracket with a 5/8” hole. It should be inserted in the 5/8” hole from the
topside of the bracket.
5. Part A is installed on top of the bracket (and Part B if used) or mounng surface with the wrench ats up
and the O-ring down. The rubber O-ring on the boom of part A acts as a seal to prevent water entering
the mounng surface hole. Maximum torque: 16 lb-.
6. The center conductor of Part E should end up 1/32” to 3/16” proud of Part A to properly interface with
the NMO style antenna. Tighten the antenna by hand, to just snug.
A) 1 1/8" - 18 U NEF NMO Nut
B) 3/8" by 5/8" Bushing for 5/8" Hole (Optional)
C) Mounting Surface/Bracket, 1/8" to 1/4" Thick
D) Toothed Sa ddle Washer
E) 3/8" - 24 UNF Right An gle Coaxial NMO Interface

Termékspecifikációk

Márka: Midland
Kategória: rádió
Modell: MicroMobile MXTA24

Szüksége van segítségre?

Ha segítségre van szüksége Midland MicroMobile MXTA24, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek