Használati útmutató Midland MicroMobile MXAT04

Midland rádió MicroMobile MXAT04

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Midland MicroMobile MXAT04 (1 oldal) a rádió kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/1
5900 Parretta Drive ● KANSAS CITY, MO ● 64120
PHONE: (816) 241-8500 ● FAX: (816) 241-5713
EMAIL: mail@midlandradio.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/26/2023
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounng brackets or surfaces up to 3/4" thick. substanal
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is oponal for mounng brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
o the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounng hole in the bracket or surface, Part C.
6. Slide the at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in posion while ghtening the hex nut, Part F. Maximum torque 35 lb-.
8. Finish roung the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.

Termékspecifikációk

Márka: Midland
Kategória: rádió
Modell: MicroMobile MXAT04

Szüksége van segítségre?

Ha segítségre van szüksége Midland MicroMobile MXAT04, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek