Használati útmutató Midland MXTA48

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Midland MXTA48 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.3 csillagra

5900 Parretta Drive KANSAS CITY, MO 64120 ●●

PHONE: (816) 241-8500 FAX: (816) 241-5713 ●

EMAIL: mail@midlandusa.com

WEBSITE: midlandusa.com

Midland Radio Corporation

midlandusa.com

4/8/2024

MXAT04 and MXAT05 Assembly Diagram

1. The MXAT04 and MXAT05 are designed for mounting brackets or surfaces up to 3/4" thick. substantial

2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.

3. Part B, 3/8” spacer, is optional for mounting brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,

should be removed for brackets or surfaces more than 3/8” thick.

4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid

off the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.

5. Route the coaxial cable from the topside through the mounting hole in the bracket or surface, Part C .

6.he Slide tat washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order

shown.

7. Hold the antenna assembly in position while tightening the hex nut, Part F. Maximum torque 35 -. lbft

8. Finish routing the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259

adapter.

Termékspecifikációk