Használati útmutató Mikrotik CCR2116-12G-4S+

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mikrotik CCR2116-12G-4S+ (19 oldal) a router kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.7 csillagra

CCR2116-12G-4S+

CCR2116-12G-4S+

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

First Use

Connect with your computer to the device;

Download the configuration tool;https://mt.lv/winbox

Open thetab and connect to the device using MAC address;

Neighbors



Theuser name:, by default there is no password(or, for some models, check user and wireless passwords on the sticker).;

admin

Todupdate the device to the latest software versionownload the latest RouterOS software from;https://mikrotik.com/download

Choose ARM64 packages, and save them to your computer;

Return to the WinBox and upload downloaded packages;

Restart the device.

Powering

The device accepts powering from two redundant power supplies, each accepts 100-240 V AC power. You can use either, or both at the same time. Up to

60 W power consumption.

Extension Slots and Ports

12x 10/100/1000 Ethernet ports.

4x 10G SFP ports.

One M.2 slot, type PCIe x4

RJ45 console port

The CCR2116-12G-4S+ has PCIe Gen 3.0 p1-x4 connection to the M.2 slot.

Recommended are NVMe M.2 2280mm M key SSD disks with no capacity limitations.

Termékspecifikációk