Használati útmutató Mikrotik hAP mini

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mikrotik hAP mini (3 oldal) a hozzáférési pont kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/3
hAP mini and lite series
The hAP is a simple home wireless access point. It is already configured, you can simply plug in your ISP cable
and start using wireless internet. We recommend you to set up a password to secure your device.
Powering
The device accepts powering from the microUSB port. The port itself doesn't function as a standard microUSB port
for data, it is only used for power. You can use any standard 0.5-2A USB adapter that usually come with
smartphones. One 5V 0.7A USB charger is included in the box.
The power consumption under maximum load can reach 3.5W.
Setup
1. Connect your internet cable to the first port, and, if you have wired devices, connect them to the other ports
2. Set your computer IP configuration to automatic (DHCP).
3. From your PC or smartphone, connect to the wireless network name which starts with “MikroTik”.
4. Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
configuration since there is no password by default, you will be logged in automatically. Set up your ,
password in the screen that loads.
Configuration
RouterOS includes many configuration options in addition to what is described in this document. We suggest to
start here to get yourself accustomed to the possibilities: . In case IP connection is not available, thehttp://mt.lv/help
Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN side (all http://mt.lv/winbox
access is blocked from the internet port by default).
For recovery purposes, it is possible boot the device from network, see section Buttons and jumpers.
Extension slots and ports
The Ethernet ports are connected through a switch chip, can be configured individually and support
automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables
for connecting to other network devices.
Integrated wireless module which supports AP/CPE/P2P/Repeater modes.
Buttons and jumpers
RouterBOOT reset button has the following functions:
Hold the button before powering on the device, and at power up, the button will force load the backup boot
loader. Continue holding the button for the other two functions of this button.
Release the button when green LED starts flashing, to reset RouterOS configuration. To not load backup
boot loader, you can start holding the button after power is already applied.
Release the button after LED is no longer flashing (~20 seconds) to cause device to look for Netinstall
servers (required for reinstalling RouterOS over network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
See mikrotik.com for more information. Document #36637, modified on 12/04/17

Termékspecifikációk

Márka: Mikrotik
Kategória: hozzáférési pont
Modell: hAP mini

Szüksége van segítségre?

Ha segítségre van szüksége Mikrotik hAP mini, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hozzáférési pont Mikrotik

Útmutatók hozzáférési pont

Legújabb útmutatók hozzáférési pont