Használati útmutató MILAB VIP-60
Olvassa el alább 📖 a magyar nyelvű használati útmutatót MILAB VIP-60 (6 oldal) a mikrofon kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 3.5 csillagra
Oldal 1/6

Milab VIP-60
Quick Guide Manual

Thank You for Choosing a Milab Microphone!
With a history that goes back to the 1930s, Milab is one of the oldest,
continuously operating microphone manufacturers in the world.
Every one of our microphones is handcrafted in our plant in southern Sweden.
Our quality control is meticulous and all microphones have to pass several
stages of testing, including rigorous audio tests in our anechoic chamber.
We believe in our products, which is why every microphone is delivered with
its own individual frequency chart and our industry-leading lifetime warranty.
Congratulations on your purchase and welcome to the Milab family!
Thomas Nöjdh, President
Package Includes
Milab VIP-60 condenser microphone
Rycote InVision USM shockmount
Individual frequency chart
Quick guide manual
The Milab VIP-60 Condenser Microphone
The VIP-60 is an upgrade of what is arguably the most iconic Milab model
ever produced, the VIP-50. While the VIP-60 boasts a new capsule, optimized
circuitry and a signi cant reduction in self-noise, fans of the predecessor will
still recognize the unique sound with its ribbon-like warmth, sparkly highs
and, of course, the extremely smooth off -axis response.
This is a microphone that has been designed to be the crown jewel of any stu-
dio, and it has the sparkly Nextel metallic nish to prove it (but is also
available in black).
The VIP-60 off ers ve diff erent polar patterns and a selection of lters and
pre-attenuation pads. It is delivered in an SKB 3i waterproof case with a Ryco-
te InVision USM shockmount. Factory matched pairs are available.

Connection
The VIP-60 can be connected to any mic input, mixer/ampli er, or mic
preamp using a standard microphone cable (XLR). The microphone is
designed for phantom powering at 48 V (P48, IEC 1938) with positive
voltage on the audio lines versus the cable shield.
Microphone XLR pinout:
1: Ground (shield)
2: Hot (+ phase)
3: Cold (- phase)
If the input device does not support phantom power, an external power supply
has to be connected between the microphone and the input. Make sure that the
extra phantom power has a DC-free output against the mixer, otherwise an RC
network has to be incorporated to block the 48 VDC.
Connecting the microphone to an unbalanced input:
Connecting the microphone to an unbalanced input without a transformer.
Pin 2 is the “hot phase“ and should be connected to the input. Pin 3 should
be left open:
Termékspecifikációk
Márka: | MILAB |
Kategória: | mikrofon |
Modell: | VIP-60 |
Szüksége van segítségre?
Ha segítségre van szüksége MILAB VIP-60, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók mikrofon MILAB
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
Útmutatók mikrofon
- mikrofon Plantronics
- mikrofon Shure
- mikrofon Phonic
- mikrofon Intricon
- mikrofon Solid State Logic
- mikrofon Radial Engineering
- mikrofon Vtech
- mikrofon Alto
- mikrofon NOX
- mikrofon JBL
- mikrofon Atlas
- mikrofon Gemini
- mikrofon MOZA
- mikrofon Audio-Technica
- mikrofon AEA
Legújabb útmutatók mikrofon
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025