Használati útmutató Millennia HV-32

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Millennia HV-32 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 3.5 csillagra

Oldal 1/2
Millennia
Millennia Media, Inc.
4600 Missouri Flat Road
Placerville, CA 95667
http://www.mil-media.com
(530) 647-0750
Fax (530) 647-9921
Music & Media Systems
HV-32 User Guide
revised 042012
Protecting Against Electrostatic
Discharge Static electricity can harm
delicate components on the HV-32 board.
To prevent static damage, discharge
static electricity from your body before
you touch any jumpers or switches with
the cover removed. You can do so by
touching an unpainted metal surface on
the API rack’s chassis.
Do not install or remove the
module until the console or
rack’s power is off.
Compatible Racks The HV-32 is
designed to work in an API L200 rack,
Vision or Legacy console. If you are
using another brand, be sure it meets or
exceeds the API spec.
The HV-32 power consumption is:
+140mA,25mA with Phantom Power
selected
Signal LEDs indicate signal level at
-30dBu (green), +8dBu (yellow) and
+18dBu (red).
Gain is a continuously variable gain
control. It has a high gain jump near full
clockwise for low level signals.
Ribbon-Dyn Mic DC couples the mic to
the gain stage and also provides an
additional 10dB of gain. Use with any
Ribbon or Dynamic mic (like an SM-57).
A mic requiring phantom power will not
work in this mode.
Pad Attenuates the input signal after
the gain stage by 15dB.
Phantom Power turns the +48V
phantom power supply on.
Avoid connecting or disconnecting
mics with the +48V on (hot
patching). This can damage the
mic, preamp and make some very
loud pops that can damage your
monitoring system and ears.

Termékspecifikációk

Márka: Millennia
Kategória: nincs kategorizálva
Modell: HV-32

Szüksége van segítségre?

Ha segítségre van szüksége Millennia HV-32, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek