Használati útmutató Milwaukee 48-35-1311
Milwaukee
Laserwaterpas
48-35-1311
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee 48-35-1311 (1 oldal) a Laserwaterpas kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.3 csillagra
Oldal 1/1
BULLETIN NO.
54-07-3545
SERVICE PARTS LIST
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 -------------- Steel Strap (16)
2 -------------- Magnet (8)
3 -------------- M3 x 7mm T10 FH Screw (8)
4 -------------- Friction Magnet (2)
5 44-26-0140 Right Magnet Assembly (4)
6 -------------- M3 x 16mm T10 PH ST Screw (1)
7 -------------- Back Plate (1)
8 31-10-0045 Back Plate Kit (1)
9 44-26-0135 Left Magnet Assembly (4)
CATALOG NO. 48-35-1311
REVISED BULLETIN
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
360 Laser Mount
STARTING
SERIAL NO.
DATE
Aug. 2020
WIRING INSTRUCTION
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
6
1
(x16)
7
3
(x8)
4
(x2)
2
(x8)
84 6
7
51 2
3
91 2
3
MILWAUKEE TOOL l www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, Wisc. 53005
Drwg. 1
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2).
Inspect sticker applied to the face of the Magnet (2). Inspect sticker applied to the face of the Magnet (2).
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the
Orient the Magnet and Steel Strap (1) so that the Orient the Magnet and Steel Strap (1) so that the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the
"N/S" faces in the upward direction relative to the "N/S" faces in the upward direction relative to the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the
tool. The left (L) is inserted into the left side of the tool. The left (L) is inserted into the left side of the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the
bracket and the right (R) magnet is inserted into the bracket and the right (R) magnet is inserted into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the
right side. Insert the Magnet and Steel Strap into the right side. Insert the Magnet and Steel Strap into the
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter
mount so that the post aligns with the inner diameter mount so that the post aligns with the inner diameter
on the magnet.
on the magnet.
on the magnet.
on the magnet. After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is
After the Magnet and Steel Strap is on the magnet. After the Magnet and Steel Strap is
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed
inserted into the mount, the sticker can be removed inserted into the mount, the sticker can be removed
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not
and the screws (4) can be hand tightened. Do not and the screws (4) can be hand tightened. Do not
over tighten.
over tighten.
over tighten.
over tighten.over tighten.
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet
2 additional sets of Left (L) Magnet Assemblies (5)
Assemblies (5)
Assemblies (5)
Assemblies (5) 2 additional sets of Left (L) Magnet Assemblies (5)
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located
and Right (R) Magnet assemblies (9) are located and Right (R) Magnet assemblies (9) are located
here.
here.
here.
here.here.
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw
In order to remove the Back Plate (7), remove Screw In order to remove the Back Plate (7), remove Screw
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate
(6). The screw will act like a stop so the back plate (6). The screw will act like a stop so the back plate
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.
does not come o with misuse.does not come o with misuse.
**
Termékspecifikációk
| Márka: | Milwaukee |
| Kategória: | Laserwaterpas |
| Modell: | 48-35-1311 |
Szüksége van segítségre?
Ha segítségre van szüksége Milwaukee 48-35-1311, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Laserwaterpas Milwaukee
30 Augusztus 2024
30 Augusztus 2024
5 Augusztus 2024
23 Július 2024
20 Július 2024
Útmutatók Laserwaterpas
- Laserwaterpas Fluke
- Laserwaterpas Brandson
- Laserwaterpas Laserliner
- Laserwaterpas Silverline
- Laserwaterpas Craftsman
- Laserwaterpas Neo
- Laserwaterpas Einhell
- Laserwaterpas Futech
- Laserwaterpas Bruder Mannesmann
- Laserwaterpas Toolcraft
- Laserwaterpas Skil
- Laserwaterpas Hilti
- Laserwaterpas Steinberg
- Laserwaterpas Ozito
- Laserwaterpas Makita
Legújabb útmutatók Laserwaterpas
29 Március 2025
27 Március 2025
22 Március 2025
6 Január 2025
6 Január 2025
6 Január 2025
4 Január 2025
4 Január 2025
18 December 2024
18 December 2024