Használati útmutató Milwaukee M12 Fuel 2503-22

Milwaukee fúrógép M12 Fuel 2503-22

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M12 Fuel 2503-22 (20 oldal) a fúrógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
Cat. No. / No de cat.
2503-20, 2504-20
M12 FUEL™ 1/2" DRILL/DRIVER, 1/2" HAMMER DRILL/DRIVER
PERCEUSE/TOURNEVIS 13 mm (1/2") ET PERCEUSE À
PERCUSSION/TOURNEVIS 13 mm (1/2") M12 FUEL™
TALADRO/DESTORNILLADOR 13 mm (1/2") Y TALADRO
PERCUTOR/DESTORNILLADOR 13 mm (1/2") M12 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explo-
sion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
DRILL/DRIVERS, HAMMER
DRILLS/DRIVERS, DRIVERS
Safety instructions for all operations
• Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
•Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fasteners may contact hidden wiring.
Cutting accessory or fasteners contacting a “live” wire
may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Safety instructions when using long drill bits
•Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the bit
tip in contact with the workpiece. At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit and do
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal injury.
•
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
SPECIFICATIONS
Volts .............................................................. 12 DC
Battery Type ................................................. M12™
Charger Type ................................................M12™
Recommended Ambient
Operating Temperature .................... 0°F to 125°F
Capacities
Steel ............................................................... 1/2"
Wood
Flat Bit .....................................................1-1/8"
Auger Bit ........................................................ 1"
Hole Saw ................................................. 1-3/4"
Screws (dia.)............................................... 3/8"
Masonary (2504-20 only)................................ 3/8"
Cat. No. 2503-20
.....................................................
No Load RPM ...................LO 0 - 450, HI 0 - 1700
Cat. No. 2504-20
.....................................................
No Load RPM ...................LO 0 - 450, HI 0 - 1700
No Load BPM ...............LO 0 - 6750, HI 0 - 25,500
FUNCTIONAL DESCRIPTION
1. Keyless chuck
2. Torque selector collar
3. Speed selector
4. Belt hook
5. Fuel gauge
6. Handle
7. Trigger
8. Control Switch
9 LED
12
5
3
4
8
9
7
6

Termékspecifikációk

Márka: Milwaukee
Kategória: fúrógép
Modell: M12 Fuel 2503-22

Szüksége van segítségre?

Ha segítségre van szüksége Milwaukee M12 Fuel 2503-22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók fúrógép Milwaukee

Milwaukee

Milwaukee M12 BDDXKIT Útmutató

30 December 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2709-22 Útmutató

8 Október 2024
Milwaukee

Milwaukee M18 FPD Útmutató

1 Október 2024
Milwaukee

Milwaukee 5376-20 Útmutató

30 Szeptember 2024
Milwaukee

Milwaukee 0756-22 Útmutató

20 Szeptember 2024
Milwaukee

Milwaukee M18 Útmutató

13 Szeptember 2024
Milwaukee

Milwaukee PH 30 Power X Útmutató

13 Szeptember 2024
Milwaukee

Milwaukee 5426-21 Útmutató

11 Szeptember 2024
Milwaukee

Milwaukee M12 Fuel 3403-22 Útmutató

10 Szeptember 2024
Milwaukee

Milwaukee M18 Fuel 2788-22HD Útmutató

8 Szeptember 2024

Útmutatók fúrógép

Legújabb útmutatók fúrógép

Bavaria By Einhell

Bavaria By Einhell BPAS 14,4-2A Útmutató

2 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPAS 14,4 AK Útmutató

2 Április 2025
Bavaria By Einhell

Bavaria By Einhell BSM 1000-2E Útmutató

2 Április 2025
Makita

Makita P-90451 Útmutató

1 Április 2025
Einhell

Einhell AS-E 18-2 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-AS 12 Li Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-SB 650 Útmutató

30 Március 2025
Einhell

Einhell BT-MX 1300 E Útmutató

30 Március 2025
Verto

Verto 65H105 Útmutató

28 Március 2025
Makita

Makita HR2450 Útmutató

28 Március 2025