Használati útmutató Milwaukee M18 Fuel ONE-KEY 2805-22

Milwaukee fúrógép M18 Fuel ONE-KEY 2805-22

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Milwaukee M18 Fuel ONE-KEY 2805-22 (20 oldal) a fúrógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/20
Cat. No. / No de cat.
2805-20, 2806-20
M18 FUEL™ 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
WITH ONE-KEY™
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18 FUEL™ AVEC ONE-KEY™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18 FUEL™ CON ONE-KEY™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
DRILL/DRIVER
Safety instructions for all operations
•Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
•Use the auxiliary handle(s). Loss of control can
cause personal injury.
•Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory or fasteners may contact
hidden wiring. Cutting accessory or fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the
operator an electric shock.
Safety instructions when using long drill bits
•Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the
bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in
personal injury.
• Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits can
bend causing breakage or loss of control, resulting
in personal injury.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous out-
come. Do not use this tool if you do not understand
these operating instructions or you feel the work is
beyond your capability; contact Milwaukee Tool or
a trained professional for additional information or
training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Volts 18 DC..............................................................
Battery Type .................................................M18™
Charger Type M18™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
Cat. No. 2805-20
.....................................................
No Load RPM ........... Low 0 - 550 High 0 - 2000
Steel ................................................................. 1/2"
Wood Flat Bit .............................................. 1-1/2"
Auger Bit ........................................... 1-1/2"
Hole Saw .......................................... 3-1/2"
Screws (dia.)........................................ 5/8"
Self Feed Bits ................................. 2-9/16"
Cat. No. 2806-20
.....................................................
No Load RPM ........... Low 0 - 550 High 0 - 2000
BPM ................................................High 0 - 32,000
Steel ................................................................. 1/2"
Wood Flat Bit .............................................. 1-1/2"
Auger Bit ........................................... 1-1/2"
Hole Saw .......................................... 3-1/2"
Screws (dia.)........................................ 5/8"
Self Feed Bits ................................. 2-9/16"
Masonry ............................................................ 5/8"
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Blows per Minute Under Load (BPM)
C US
UL Listing for Canada and U.S.

Termékspecifikációk

Márka: Milwaukee
Kategória: fúrógép
Modell: M18 Fuel ONE-KEY 2805-22

Szüksége van segítségre?

Ha segítségre van szüksége Milwaukee M18 Fuel ONE-KEY 2805-22, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók fúrógép Milwaukee

Milwaukee

Milwaukee M12 BDDXKIT Útmutató

30 December 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2709-22 Útmutató

8 Október 2024
Milwaukee

Milwaukee M18 FPD Útmutató

1 Október 2024
Milwaukee

Milwaukee 5376-20 Útmutató

30 Szeptember 2024
Milwaukee

Milwaukee 0756-22 Útmutató

20 Szeptember 2024
Milwaukee

Milwaukee M18 Útmutató

13 Szeptember 2024
Milwaukee

Milwaukee PH 30 Power X Útmutató

13 Szeptember 2024
Milwaukee

Milwaukee 5426-21 Útmutató

11 Szeptember 2024
Milwaukee

Milwaukee M12 Fuel 3403-22 Útmutató

10 Szeptember 2024
Milwaukee

Milwaukee M18 Fuel 2788-22HD Útmutató

8 Szeptember 2024

Útmutatók fúrógép

Legújabb útmutatók fúrógép

Bavaria By Einhell

Bavaria By Einhell BPAS 14,4-2A Útmutató

2 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPAS 14,4 AK Útmutató

2 Április 2025
Bavaria By Einhell

Bavaria By Einhell BSM 1000-2E Útmutató

2 Április 2025
Makita

Makita P-90451 Útmutató

1 Április 2025
Einhell

Einhell AS-E 18-2 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-AS 12 Li Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-SB 650 Útmutató

30 Március 2025
Einhell

Einhell BT-MX 1300 E Útmutató

30 Március 2025
Verto

Verto 65H105 Útmutató

28 Március 2025
Makita

Makita HR2450 Útmutató

28 Március 2025