Használati útmutató Mio Mivue 760D

Mio Dashcam Mivue 760D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mio Mivue 760D (3 oldal) a Dashcam kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/3
M760D
STARVIS dual cam
Detachable GPS Rider dash cam Installation
Guide
Suggested installation location for
each accessory
Main device Reference installation location
Example 1
Scooter
Example 2
Straddle dual-purpose motorcycle
WiFi
Avoid installing the Main
device at locations with
higher temperatures such
as next to the engine or
at the bottom of the
storage compartment, or
being covered by
raincoat; it is also
recommended to fix it on
the side using the buckle.
C. Front cam
B. GPS multifunction control box
A. Main device
D. Rear cam
If the Main device is
exposed (rail will fall
on it), be sure to
tighten the
anti-dismantle screws
of the memory card.
Avoid hiding the front
(the side with the logo)
of the Main device
under metal objects in
order to prevent poor
WiFi reception.
A.
To install the Main device at the front storage
compartment, the front and rear cams can be
switched around for installation.
A.
The Main device can be installed in the
toolbox space.
B.
The Main device can be installed on the side of
the storage compartment under the seat, but
avoid covering it with raincoats and resulting to
poor radiation.
Avoid attaching it at locations near the bottom
where heat source is emitted (the bottom of the
storage compartment is usually where the
engine and battery are installed).
C
B
A
D
A
A
B
Things you need to know before installation:
1. The following installation guide is for reference only due to different brands, model
types and personal usage habits; thorough discussion with vehicle mechanics is
recommended before performing installation.
3. The input of the M760D power cable is 12V/2A; please confirm whether the vehicles
circuit voltage and current can bear the load in order to prevent the fuse of the
motorcycle to burn due to overload. Some vehicle models have reserved backup
power; please use a multimeter to confirm whether the backup power connector can
be used before installation.
5. Before officially installing the dash cam, confirm that the BMW connector of each
cable segment is properly tightened and wrapped with thermal casing or waterproof
tape in order to reduce the scratching of internal objects or generating strange noises
due to vibrations from the motorcycle.
6. To install it on the Gogoro electric scooter, please discuss with Gogoros genuine
mechanic to confirm whether the charging port can supply 12V/2A power before
installation.
2. Before official installation, please connect the circuits of all components (including
front and rear cams, Main device, GPS multifunction control box and 12V power cable);
first connect the 12V power cable to the battery or fuse and confirm that the functions
of each component can be successfully turned on, and then hide the cables and
perform installation.
4. After the power of the motorcycle is turned on, it takes approximately 10-12 seconds
for power to be supplied to the dash cam and turned on; at this time, will blue light
flash on the GPS multifunction control box.* If red light flashes it means something is
abnormal, and the cable segments must be checked to see if they are properly and
tightly connected.

Termékspecifikációk

Márka: Mio
Kategória: Dashcam
Modell: Mivue 760D

Szüksége van segítségre?

Ha segítségre van szüksége Mio Mivue 760D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek