Használati útmutató Mitsubishi SD205U

Mitsubishi Beamer SD205U

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mitsubishi SD205U (30 oldal) a Beamer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/30

DATA PROJECTOR

MODEL

XD U205

SD U205

User Manual

This User Manual is important to you.

Please read it before using your projector.

ENGLISH

XD205

SD205

EN-2

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence

of uninsulated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a

risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operat-

ing and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

Use the attached specified power supply cord. If you use

another power supply cord, it may cause interference with

radio and television reception.

Use the attached RGB cable with this equipment so as to keep

interference within the limit of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN

THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for

the Protection of Electronic Computer/Data Processing Equip-

ment, ANSI/NFPA 75.

The attached power cords are to be used exclusively for this

product. Never use them for other products.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Direc-

tive 89/336/EEC "EMC Directive" as amended by Directive 92/

31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Direc-

tive" as amended by Directive 93/68/ EEC.

The electro-magnetic susceptibility has been chosen at a level

that gains proper operation in residential areas, on business

and light industrial premises and on small-scale enterprises,

inside as well as outside of the buildings. All places of opera-

tion are characterized by their connection to the public low volt-

age power supply system.

WARNING

Use the attached RGB cable with this equipment so as to keep

interference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR

OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIP-

MENT AND SHALL BE EASILY ACCESSIBLE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Note: This symbol mark is for

EU countries only.

This symbol mark is accord-

ing to the directive 2002/96/

EC Article 10 Information for

users and Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high

quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life,

should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/

recycling centre.

In the European Union there are separate collection systems for used electrical

and electronic product.

Please, help us to conserve the environment we live in!

EN-3

ENGLISH

Contents

Important safeguards..........................................................................................................................4

Overview.............................................................................................................................................6

Remote control ...................................................................................................................................8

Installation ..........................................................................................................................................9

Basic connections.............................................................................................................................10

Preparation .......................................................................................................................................12

Basic operation.................................................................................................................................13

Menu operation.................................................................................................................................15

Image adjustment .............................................................................................................................18

Advanced feature..............................................................................................................................20

Lamp replacement............................................................................................................................22

Troubleshooting ................................................................................................................................23

Indicators ..........................................................................................................................................26