Használati útmutató Mooer Tone Capture GTR
Mooer
nincs kategorizálva
Tone Capture GTR
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mooer Tone Capture GTR (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra
Oldal 1/2
1. Footswitch:
• Switch On/Off
• Sampling
2. RED/BLUE LED Button ：
• Press to select sampling mode, presets.
3. LED indicator:
•Indicates the current slot
4. Output:
mono jack.•¼
5. Input:
mono jack.•¼
6. TREBLE
•Adjust High frequency
7. MID SHIFT:
•Adjust Mid frequency adjustment
8. BASS:
•Adjust Low frequency
9. MID:
•Adjust Mid frequency
10. LEVEL:
•Volume control
12. USB port:
•Connect to the PC for firmware
update via USB cable.
11. DCIN:
Connect a 9V DC 200mA •
Centre pin negative
power supply
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct volta ge.
Be sure to only us e an AC adapter which supplies 9V DC, 200m A .
Unplug the AC po wer adapter when not in use or during elec tr ical storms.
FCC certification
This device complies with Part 1 5 of t he FCC Rules. Operation is subject
to the followi ng two conditions:
Thi s device may not cau se h armful interference.
This device must accept any interference received, including interference
that may cause u ndesired opera ti on.
Location
To avoid defor mation, discol or ation, or other serious damage, do not
expose this un it to the following conditions:
Direct sunli ght Heat sources
Magnetic fields Extreme temp erature or humid it y
Excessive dusty or dirty locati on High humidity or moisture
Strong vibra tions or shocks
Radio Freque ncy Interference
Radios and televisions place d nearby may experience reception i nt erference.
Operate this u nit at a suitable di stance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth. If n ecessary, slightly moisten the cloth.
Do not use abras ive cleanser, cl ea ning alcohol, pa in t thinners, wax,
solvents, cl eaning fluids, o r ch emical-impregnated wiping clo th s.
Can capture un ique guitar tona l qualities throug h sampling technol og y.
Can be used as an in dividual EQ peda l.
7 preset slots t o store EQ and sampled guitar sounds.
Switch betwe en TRUE BYPASS or BUF FER BYPASS.
Firmware upgradeable via USB .
Main Feature
Layout Instructions
•Power on the pedal, press the LED button to choose a preset slot. If there is already
a stored preset file, the LED indicator will stay red. If the slot is blank, the LED
indicator will blink.
•The TONE CAPTURE Guitar Pedal can sample any guitar, provided it has some form
of pickup, and create a detailed digital Guitar model using MOOER’s proprietary non-
linear IR technology. This is achieved by comparing the differences between the
“SOURCE” (the guitar you want to use) and the guitar being sampled or the “TARGET”
(the guitar you want it to sound like). A complex calculation then ensues and an
uncanny digital recreation of your “TARGET” guitar tone is born. Activating the TONE
CAPTURE with your newly created guitar model will instantly transform the tone of your
“SOURCE” into that of your “TARGET”. The guitar model can then be tweaked even
further for use with other “SOURCE” instruments or even to create something completely
new.
GTR CAPTURE
•After powering on, connect the TARGET guitar (the guitar you intend to sample),
then press and hold the footswitch. The button light will turn red indicating it is in
the TARGET acquisition mode. Press the footswitch again, and TARGET sampling
begins indicated by the the LED indicators illuminating in order. During this process,
we recommend playing an open chord first and then playing across the full range of
the instrument. (The wider the coverage, the better the result will be.) When all 7
LEDs are lit and the light stops flashing, the sampling window is closed. Pressing
the switch during or after sampling can terminate the sampling process. Press the
switch again to start the sampling process over. If you are not happy with the sample,
press the switch again to star t over.
TARGET
•Press the LED button, it will turn blue to enter the SOURCE sampling mode.
Connect the INPUT to the guitar you want to use with the TARGET sample (SOURCE).
Short press the switch to start SOURCE capture. Again, we recommend playing an open
chord first and then playing across the full range of the instrument or play as close as
possible to what was played in TARGET mode. Pressing the switch during the sampling
process can terminate the sampling process. Press the switch again to start sampling
again and after the sampling is finished, press the switch to resample.
SOURCE
MUTE
•After SOURCE and TARGET are sampled, press and hold the footswitch to
mute the output.
Savin g
•After the SOURCE sampling is finished, press the LED button to confirm the sampling
result and choose a save slot. At this time, the LED indicator will start to flash to indicate
the current slot. Press and hold the LED Button to save the sampling file.
Delete
•The sampling files can be deleted by pressing the LED Button while the effect is off.
The LED flashes quickly and stops, indicating that the deletion is completed.
TRUE/BUFFER BYPASS
•Unplug the power supply. Press and hold the footswitch while powering on the unit.
When the LED indicator lights up in ascending order (1-7), the pedals is in buffer
bypass mode. If the LED indicator lights up in descending order (7-1), the pedal
is in true bypass mode.
Factory reset
• Unplug the power supply, press and hold the LED Button, then power on.
The pedal will reset.
Firmware update
•Unplug the power supply, press and hold the footswitch and LED
Button simultaneously, power on the pedal to enter firmware update mode.
Instructions
Input: 1/4" mono jack (impedance 2.2M Ohms)
Output: 1/4" mono jack (impedance 100Ohms)
Power suppl y: 9V DC transformer (internal negative external), MOOER Micro
Power is recommended
Current Draw: 200mA
Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
Weight: 155g
Accessories: User Manual
*Disclaimer: Parameters may update without notice.
1
8
5
7
6
11
9
2
4
USB
12
3
10
Parameter saving and editing
Termékspecifikációk
| Márka: | Mooer |
| Kategória: | nincs kategorizálva |
| Modell: | Tone Capture GTR |
Szüksége van segítségre?
Ha segítségre van szüksége Mooer Tone Capture GTR, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Mooer
8 Január 2025
2 Szeptember 2024
30 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva BLANCO
- nincs kategorizálva Ferguson
- nincs kategorizálva Lifan
- nincs kategorizálva Comtek
- nincs kategorizálva Connection
- nincs kategorizálva Wehkamp
- nincs kategorizálva Exibel
- nincs kategorizálva Mode Machines
- nincs kategorizálva UClear
- nincs kategorizálva Datacard
- nincs kategorizálva Fredenstein
- nincs kategorizálva Freedor
- nincs kategorizálva Tema
- nincs kategorizálva Lantus
- nincs kategorizálva Fetch
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025