Használati útmutató Mooer TresCab

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mooer TresCab (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.8 csillagra

6. LOW/DIS. Knob:

9. CAB Models Knob: Select different cab simulation mode.

1. TRUE BYPASS Footswitch:

Push down the footswitch to toggle

between on and bypass status.

2. ON/OFF LED:

3. DC IN Power Jack:

For power supply, use a 9-volt

DC regulated AC adapter (plug

polarity is positive on the barrel

and negative in the center).

4. INPUT Jack:

1/4mono audio jack, for connecting ”

guitar.

5. OUTPUT Jack:

1/4” mono audio jack, outputs the signal.

* Disclaimer: Any specification’s update won't be amended in this manual.

7. Mode Switch: Choose the EQ or MIC.

Shows the on/off status of TresCab,

when the LED is lit the

effect is engaged.

Main Features

Cab Simulated Pedal

High-quality digital Cab simulated pedal, offers five different types

of cab choices

Can select two-stall balanced adjustment and microphone pick up

location selection with the mode switch

Adjusts low frequency in EQ mode;

adjusts the distance between

microphone pickup and cabinet in

CAB mode.

8. HIGH/POS. Knob:Adjusts hi frequency in EQ mode;adjusts the deviation

of center position between the microphone and cab pickup.

Cab Models: 1x8 Combo/1x10 Combo/1x12 Open/2x12 Open/4x12 Close

Input: 1/4 monaural jack (impedance: 470k Ohms)”

Output: 1/4 monaural jack (impedance: 100 Ohms)”

Power Requirements: AC adapter 9V DC (center minus plug),

recommended to use Mooer Micro Power

Current Draw: 128 mA

Dimensions: 93.5mm (D) 42mm (W) × × 52mm (H)

Weight: 150g

Accessories: Owner’s Manual

5

94

8

3

6

7

Full metal shell

Very small and compact design

True bypass switch

DC 9V adapter power supply

Termékspecifikációk