Használati útmutató Mr Safe Personal Safety System

Mr Safe Biztonság Personal Safety System

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mr Safe Personal Safety System (8 oldal) a Biztonság kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
TABLE OF CONTENTS
WHAT IS IN THE BOX?..........................................2
INSTALLATION OF MR SAFE ..............................2
SETTING CALLS TO CARE PROVIDERS
(FAMILY, NEIGHBOURS, ETC.).............................4
RECORDING ALARM MESSAGES AND
INSTRUCTION MESSAGES...................................5
SETTING THE QUIET ALARM OR MODIFYING
THE TIME OF THE LOUD ALARM.........................5
WHAT CAN A REMOTE CARE PROVIDER DO?.......6
LOGGING ON THE REMOTE CONTROL...............6
POWER SUPPLY FAILURE / BATTERIES..............7
EXTRA SETTINGS....................................................7
SUPPORT AND GUARANTEE..................................8
M_mr.Safe_GB.pmd 23.12.2004, 16:181
English
2
Introduction
Congratulations! You have acquired the mr Safe personal security
system. Security is important. Care providers should be
reachable as soon as possible, if necessary. Your mr Safe will
make sure of that.
Before using the system for the first time, we suggest that you
read this manual to make sure that you know all the main
features and possibilities.
WHAT IS IN THE BOX?
• Remote control on batteries.
• Adapter for the station.
• Telephone cord.
• 2 screws and 2 plugs for wall mounting.
• mr Safe station (see Illustration 1&2).
a. Adapter connector.
b. Telephone line connector.
c. Connector for extra telephone set.
d. Cable guides.
e. Battery case.
f. Assembly grooves.
g. Alarm button 1.
h. Alarm button 2.
i. Alarm stop button.
j. Display.
k. LEDs.
l. Setkeys.
• Short reference guide.
• 4 AAA batteries.
INSTALLATION OF MR SAFE
ADAPTER
At the back of the mr Safe station there are 3 connectors.
The left connector is for the adapter cable. The adapter is to
be inserted into a socket and is applicable for 230VAC / 50
Hz. The socket-outlet should be installed near the equipment
and shall be easily accessible.
TELEPHONE LINE
The telephone cable is to be connected to the middle connector
at the back of the mr Safe station. The other end of the telephone
cable is to be connected to the telephone line. The use of a
switching system between the mr Safe and the telephone line is
not encouraged because of the risk of a power supply failure. If
you need to dial a ‘0’ with your ordinary telephone set when
dialling the telephone number, you have to set the switching
system or ISDN adapter at ‘direct outward dialling system’.
M_mr.Safe_GB.pmd 23.12.2004, 16:182
English
3
EXTRA TELEPHONE SET
The right connector allows the mr Safe station to be connected
in-between the analogous PTT line and your telephone set. This
way, it is not necessary to buy an extra socket or transit connector.
CABLE GUIDANCE
Depending on where you would like to install the mr Safe
station, you can guide the cables upwards or downwards.
BATTERIES
As the mr Safe station needs to continue operating in case
of a temporary power supply failure, some batteries are to
be inserted. To this effect, you can remove the screw from
the battery cover and open the battery case. The batteries
are to be positioned as indicated in Illustration 1. The mr
Safe operates on 4 AAA alkaline batteries.
MOUNTING
The mr Safe station is prepared for wall mounting. To this effect,
you place the 2 supplied screws (with the plugs if necessary) at
a distance of 6.2 cm from one another in the wall.
The mr Safe station is equipped with 2 rubber caps and 2 hard
plastic supports for horizontal positioning. mr Safe is not liable
for any damage that may be caused to your furniture.
SETTING THE CLOCK
To realize some settings, you need to open the little flap on the
front. On both sides of this flap, edges are made for convenience.
The date and time are to be set as follows:
• Press the PROG key.
• Then press the # key.
• Enter the date (day and month) and the time.
• Again press the PROG key.
For example 1 April, 9:30 is to be set as follows: PROG, #, 01 04
09 30, PROG.
SETTING TELEPHONE LINE
Nearly all the telphone lines are tone-operated. When your
ordinary telephone set is tone-operated, you will hear tones
when dialling a number. This is the default setting of the mr
Safe station.
In case of older telephone lines, the pulse-operated mode is
to be set. In this case, you will hear pulses when dialling a
number with your ordinary telephone set.
The above setting is effected as follows:
• Press PROG.
• Press 3 and then 1.
• Again press PROG.
After pressing 1, you will see PULS appear on the display.
M_mr.Safe_GB.pmd 23.12.2004, 16:183

Termékspecifikációk

Márka: Mr Safe
Kategória: Biztonság
Modell: Personal Safety System

Szüksége van segítségre?

Ha segítségre van szüksége Mr Safe Personal Safety System, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Biztonság Mr Safe

Mr Safe

Mr Safe Wireless HD IP Camera PRO - Indoor Útmutató

23 Augusztus 2024
Mr Safe

Mr Safe Personal Safety System Útmutató

22 Augusztus 2024
Mr Safe

Mr Safe Android APP Útmutató

22 Augusztus 2024
Mr Safe

Mr Safe APPLE APP Útmutató

22 Augusztus 2024
Mr Safe

Mr Safe SD-100 - SMOKE DETECTOR Útmutató

22 Augusztus 2024

Útmutatók Biztonság

Legújabb útmutatók Biztonság

Aritech

Aritech SHATTERPRO 3 Útmutató

16 Január 2025
Axis

Axis Camera Station S9001 Mk II Desktop Terminal Útmutató

15 Január 2025
Eminent

Eminent EM6511 Útmutató

15 Január 2025
Ranex

Ranex RX2567-Z Útmutató

12 Január 2025
Technaxx

Technaxx TX-106 Útmutató

11 Január 2025
NetworX

NetworX NX-595E IP Communication Module Útmutató

5 Október 2024
Provision-ISR

Provision-ISR NVR2-4100P Útmutató

23 Szeptember 2024
Gira

Gira 0342 Útmutató

23 Szeptember 2024
Unitron

Unitron Smart Alert Systeem Útmutató

23 Szeptember 2024
Netatmo

Netatmo Welcome Útmutató

22 Szeptember 2024