Használati útmutató NEC MultiSync ME651

NEC Monitor MultiSync ME651

Olvassa el alább 📖 a magyar nyelvű használati útmutatót NEC MultiSync ME651 (5 oldal) a Monitor kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/5
Quick Start Guide
AirServer® Embedded Screen Mirroring Solution
1. e Installing th MPi4 Kit AirServer
For installation and usage instructions of the MPi4 Kit AirServer, refer to the setup guide of the Raspberry Pi Compute Module 4.
https://assets.sharpnecdisplays.us/documents/installationguides/nec_raspberry_pi_compute_module4_setup_guide.pdf
2. Connections
Plug in an Ethernet cable to the LAN port of the MPi4 Kit AirServer.
NOTE recommend Ethernet: AirServer works using Wi-Fi or without network connectivity, but we for optimal performance.
3. Turn on the NEC display and select the correct source
Once the display is turned on select the source COMPUTE MODULE on the remote control. There the AirServer Quick Setup screen will ,
be displayed.
4. AirServer Quick Setup
To start the configuration, follow the on-screen instructions.
If the AirServer Raspberry Pi Compute Module 4 (MPi4 Kit AirServer) is connected to a network using an Ethernet cable, Quick Setup can
be done through a web browser on a computer or mobile device on the same network. Type in the IP address shown in the instructions and
at the bottom left of the homescreen. Once the Device Management page has loaded, type in the setup PIN to get started.

Termékspecifikációk

Márka: NEC
Kategória: Monitor
Modell: MultiSync ME651

Szüksége van segítségre?

Ha segítségre van szüksége NEC MultiSync ME651, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek