Használati útmutató NEC ST-EX2023
NEC
Lapos panel támogatás
ST-EX2023
Olvassa el alább 📖 a magyar nyelvű használati útmutatót NEC ST-EX2023 (2 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/2
ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /
Istruzioni di installazione / 取扱説明書 / 安装说明书
English
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Français
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Deutsch
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Español
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Italiano
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
日本語
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
简体中文
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
1234
AB
English
1
2 3
Français Deutsch
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unit: mm
Weight: ??
Weight: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unité: mm
Poids: ??
Poids: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Einheit: mm
Gewicht: ??
Gewicht: ??
Español
日本語
Italiano
简体中文
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unidad: mm
Peso: ??
Peso: ??
For EX201W For EX231W / EX231Wp
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unità: mm
Peso: ??
Peso: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
单位 : mm
重量 : ??
重量 : ??
Weight: ?? Weight: ??
単位 : mm
Termékspecifikációk
| Márka: | NEC |
| Kategória: | Lapos panel támogatás |
| Modell: | ST-EX2023 |
Szüksége van segítségre?
Ha segítségre van szüksége NEC ST-EX2023, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás NEC
15 Október 2024
2 Október 2024
16 Szeptember 2024
15 Szeptember 2024
6 Augusztus 2024
1 Augusztus 2024
1 Augusztus 2024
28 Július 2024
28 Július 2024
26 Július 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás AKAI
- Lapos panel támogatás Proaim
- Lapos panel támogatás Crimson
- Lapos panel támogatás ViewZ
- Lapos panel támogatás B-tech
- Lapos panel támogatás Ematic
- Lapos panel támogatás Pyle
- Lapos panel támogatás Gabor
- Lapos panel támogatás Monoprice
- Lapos panel támogatás Icy Box
- Lapos panel támogatás BenQ
- Lapos panel támogatás Kanto
- Lapos panel támogatás Bretford
- Lapos panel támogatás Peerless-AV
- Lapos panel támogatás Nabo
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025