Használati útmutató Nedis BTTR100BK

Nedis Audiostreamer BTTR100BK

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nedis BTTR100BK (76 oldal) a Audiostreamer kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/76
BTTR100BK
MANUAL (p. 2)
ANLEITUNG (S. 5)
MODE D’EMPLOI (p. 8)
GEBRUIKSAANWIJZING (p. 11)
MANUALE (p. 14)
MANUAL DE USO (p. 17)
MANUAL (p. 20)
HASZNÁLATI ÚTMUTATÓ (o. 23)
YTTÖOHJE (s. 26)
BRUKSANVISNING (s. 29)
NÁVOD K POUŽITÍ (s. 32)
MANUAL DE UTILIZARE (p. 35)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 38)
BRUGERVEJLEDNING (s. 41)
VEILEDNING (s. 44)
ИНСТРУКЦИЯ (47 стр.)
KILAVUZ (s. 50)
KASUTUSJUHEND (lk. 53)
NÁVOD (s. 56)
ROKASGRĀMATA (lpp. 59)
NAUDOJIMO VADOVAS (62 p.)
PRIRUČNIK (str. 65)
РЪКОВОДСТВО (p. 68)
INSTRUKCJA OBSŁUGI (str. 71)
PRIROČNIK (str. 74)
Audio transmitter with Bluetooth® Wireless Technology for headphones
ENGLISH
2
Product view
Pairing button
USB power connector
Audio input for TV or audio device
Setup
1. Connect the 3.5mm connector to the BTTR100BK.
2. Connect the other 3.5mm connector to the headphone output of a TV or
audio device.
3. Connect the USB connector to the USB port of the TV or audio device (or
connect the USB connector to a USB power adapter)
Operation
Connect the rst set of headphones or music receiver:
1. Take your Bluetooth® headphones or Bluetooth® music receiver.
2. Press the pairing button (check the device manual).
ENGLISH
3
3. After being connected for the rst time, the two devices will recognise each
other next time.
Connect the second set of headphones or music receiver:
1. Take the second set of Bluetooth® headphones or Bluetooth® music
receiver.
2. Press the pairing button (check the device manual).
3. Press the pairing button on the BTTR100BK once for approx. 1~2seconds.
The LED light starts blinking while the transmitter searches for the second
set of headphones or music receiver. The device that was connected rst, is
muted.
4. If the devices are connected, the LED light is constantly switched on.
Note
The BTTR100BK features the option to connect two Bluetooth® A2DP devices at
the same time. If you would like to connect a second A2DP device, you need to
reset the BTTR100BK to establish a new connection.
Reset
Press the pairing button on the BTTR100BK and release it again. The LED light
on the BTTR100BK starts blinking while the transmitter is searching for A2DP
devices nearby.
LED indication
Indication Meaning Description
Flash every 5seconds Pairing Searching for a device in pairing mode
Constantly switched on Connected BTTR100BK and device are connected
Troubleshooting
If you do not hear any sound coming from your headphones or music receiver,
check the following:
- make sure the BTTR100BK is powered;
- make sure the audio cable is correctly connected to the BTTR100BK;
- make sure that the audio source is working properly;
- make sure the volume of the audio source is set correctly;
- make sure your device is at a maximum distance of 10metres of the audio
transmitter.

Termékspecifikációk

Márka: Nedis
Kategória: Audiostreamer
Modell: BTTR100BK

Szüksége van segítségre?

Ha segítségre van szüksége Nedis BTTR100BK, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Audiostreamer Nedis

Nedis

Nedis BTTR050BK Útmutató

23 Szeptember 2024
Nedis

Nedis BTRC100BK Útmutató

25 Augusztus 2024
Nedis

Nedis BTRC110BK Útmutató

2 Augusztus 2024
Nedis

Nedis BTTC200BK Útmutató

24 Július 2024
Nedis

Nedis BTTR400BK Útmutató

20 Július 2024
Nedis

Nedis BTTR100BK Útmutató

14 Július 2024

Útmutatók Audiostreamer

Legújabb útmutatók Audiostreamer

Arcam

Arcam ST25 Útmutató

14 Január 2025
Audiolab

Audiolab 9000N Útmutató

31 December 2025
Block

Block A Útmutató

12 Október 2024
Bluesound

Bluesound NODE ICON Útmutató

24 Szeptember 2024
Amazon

Amazon Echo Show Útmutató

21 Szeptember 2024
NAD

NAD C 700 V2 Útmutató

18 Szeptember 2024
Caliber

Caliber PMR 207BT Útmutató

11 Szeptember 2024