Használati útmutató NetComm NP127

Olvassa el alább 📖 a magyar nyelvű használati útmutatót NetComm NP127 (5 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/5
AC750 WiFi Extender
NP127
Firmware Release Notes
2
AC750 WiFi Extender Firmware Release Notes
www.netcommwireless.com
Ver 1.0
Copyright
Copyright© 2015 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Please note: This document is subject to change without notice.
DOCUMENT VERSION
DATE
1.0 Initial document release
13 April 2015
www.netcommwireless.com
AC750 WiFi Extender Firmware Release Notes
3
Ver 1.0
Release Information
ITEM
DETAILS
Product Code
NP127
Product Name
AC750 WiFi Extender
Firmware Version
1.0.8
Beta/Official
Official
Firmware file name
20150410_NetComm_NP127_FW1.0.8.img
Firmware file size
3.20 MB
MD5 Sum
9F22F94F5332416852ADE33A620EEF15
Date
13 April 2015
Firmware Upgrade Instructions
1.
Plug the NP127 into a wall socket.
2.
Connect the supplied Ethernet Cable to an available Ethernet port on your PC and then connect the other end of the cable
to the Ethernet port on the NP127.
3.
Turn on the power for the wall socket. The NP127 boots up.
Note: Do not perform the firmware upgrade via WiFi. Upgrading the firmware via WiFi can corrupt the firmware causing the
unit to become unusable.
4.
Download the firmware upgrade file from the product page: http://www.netcommwireless.com/product/wifi/np127.
Unpack the archive to a folder on your hard drive.
5.
Setup the unit as described in the Quick Start Guide and power it on. Allow 60 90 seconds for the NP127 to power up.
6.
On your computer, open a web browser (Internet Explorer, Firefox, etc) and type http://my.extender in the address bar,
then press Enter.
7.
Enter the password to log in to the NP127.The default password is
admin.
Press Login.
8.
Navigate to System>Firmware Upgrade

Termékspecifikációk

Márka: NetComm
Kategória: wifi ismétlő
Modell: NP127

Szüksége van segítségre?

Ha segítségre van szüksége NetComm NP127, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek