Használati útmutató Netgear GS108MX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear GS108MX (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/7
Installation Guide
8-port Gigabit Ethernet Unmanaged Switch
with 1 Dedicated 10G SFP+ Port
Model GS108X
Package contents
NETGEAR 8-port Gigabit Ethernet Unmanaged Switch with 1 Dedicated
10G SFP+ Port (Model GS108X) or NETGEAR 8-port Gigabit Ethernet
Unmanaged Switch with 1 Dedicated 10G/Multi-Gigabit Port (Model
GS108MX)
Power adapter (power plug varies by region)
Wall-mount installation kit
Rubber feet
Installation Guide
1. Register the switch
1. From a computer or mobile device that is connected to the Internet, visit
my.netgear.com.
2. Log in to your NETGEAR account.
NOTE: If you don’t have a free NETGEAR account, you can create one.
The Your Registered Products page displays.
3. Click the REGISTER NEW PRODUCT button.
4. In the SERIAL NUMBER eld, type the serial number of your switch.
The serial number is 13 digits long. It is printed on the switch label.
5. From the PURCHASE DATE menus, select the date that you purchased
the switch.
6. Click the REGISTER button.
Your switch is registered to your NETGEAR account.
A conrmation email is sent to your NETGEAR account email address.
2. Connect the switch
Sample GS108X connections
NOTE: We recommend that you use a Category 6a (Cat 6a) cable or
higher-rated cable for 10-Gigabit Ethernet connections, and a Category
5e (Cat 5e) cable or higher-rated cable for other Gigabit Ethernet
connections.
WARNING: Before connecting this switch to outdoor cables or
devices, see https://kb.netgear.com/000057103 for safety and warranty
information.
This switch is designed for indoor use only. If you want to connect it to a
device located outdoors, the outdoor device must be properly grounded
and surge protected, and you must install an Ethernet surge protector
inline between the switch and the outdoor device. Failure to do so can
damage the switch.
8-port Gigabit Ethernet Unmanaged Switch
with 1 Dedicated 10G/Multi-Gigabit Port
Model GS108MX
October 2023
Power LED
On
Off
Gigabit Ethernet port LEDs for ports 1 through 8
1G link. Port LED lights green.
Blinking LED indicates trafc activity.
100M/10M link LED lights yellow.
Blinking LED indicates trafc activity.
No link. Port LED off.
GS108X SFP
+
LED for port 9
10G link (LED lit green).
1G link (LED lit yellow).
No link. Port LED off.
GS108MX Multi-Gigabit Ethernet LEDs for port 9
10G link (both port LEDs lit green).
Both port LEDs blinking green indicates trafc activity.
5G link (left port LED on, right port LED off). Left port LED
blinking indicates trafc activity.
2.5G link (left port LED off, right port LED on). Right port LED
blinking indicates trafc activity.
1G link (both port LEDs lit yellow). Both port LEDs blinking
yellow indicates trafc activity.
No link (both port LEDs off).
10G
10G
Sample GS108MX connections
10G
10G
Internet
Internet
XS508M with
10G Fiber Link
Storage
Servers
Computers
WA X610PA
Computers
Servers
WA X610PA
Storage
XS508M with
10G Ethernet Link
GS108MX
GS108X
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two,
Penrose Dock, Cork, T23 YY06, Ireland
Mount the switch on a wall
We recommend that you use the wall-mount screws that are included. The
screws are 0.12 in. (3 mm) in diameter, 0.78 in. (20 mm) in length.
1. Locate the two mounting slots on the bottom panel of the switch.
2. Mark and drill two holes 4.25 in. (108 mm) apart, center-to-center in the
wall where you want to mount the switch.
Use a 3/16” (4.7mm) drill bit.
The switch must be mounted horizontally with the ports on the bottom.
3. Insert the supplied anchors into the wall and tighten the screws with a
No. 2 Phillips screwdriver.
Leave about 0.15 in. (4 mm) of each screw protruding from the wall to t
into the holes on the bottom panel.
4. Position the switch so that the mount holes are directly over the screws,
and slide the switch down until the upper edge of each mount hole sits
directly on the screw, attaching the switch securely to the wall.
Support and Community
Visit netgear.com/support to get your questions answered and access the
latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à netgear.com/support/download/. (If this product is sold
in Canada, you can access this document in Canadian French at
netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration
of Conformity, visit netgear.com/about/regulatory/. See the regulatory
compliance document before connecting the power supply. For NETGEAR’s
Privacy Policy, visit netgear.com/about/privacy-policy. By using this device,
you are agreeing to NETGEAR’s Terms and Conditions at
netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors. If you connect cables or devices that are
outdoors to the switch, see kb.netgear.com/000057103 for safety and
warranty information.
Applicable to 6 GHz devices only: Only use the device indoors. The operation
of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft,
except that operation of this device is permitted in large aircraft while ying
above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
Technical specications
Specication Description
Ethernet network
interfaces
Ports 1–8: Gigabit Ethernet with RJ-45
connectors that support 100BASE-TX and
1000BASE-T
Uplink port Port 9 GS108X: 1G/10G SFP+
Port 9 GS108MX: 10G/Multi-Gigabit
(10G/5G/2.5G/1G)
Fanless 0 dBA
Power adapter 12V @ 1.5A DC input
Power consumption 4.63W
Dimensions (W x D x H) 9.3 x 4.0 x 1 in. (236 x 102 x 27 mm)
Weight 1.27 lb (575 g)
Operating temperature 32 to 104° F (0 to 40° C)
Operating humidity 10 to 90% relative humidity, noncondensing
Maximum operating
altitude
10,000 ft. (3,000 m)
Storage temperature –4 to 158° F (–20 to 70° C)
Storage humidity 5 to 95% relative humidity, noncondensing
Maximum storage
altitude
10,000 ft. (3,000 m)
Electromagnetic
certications and
compliance
FCC class B device, EU-RoHS
Safety certications CB, CE class B, VCCI class B,
C-Tick/RCM class B
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
GS108X Supported Modules
Model Description
1G Fiber SFP Transceivers
AGM731F NETGEAR 1000BASE-SX SFP LC Transceiver (multimode,
1000m OM4, 550m OM3 50/125µm, 275m OM2/OM1
62.5/125µm)
AGM732F NETGEAR 1000BASE-LX SFP LC Transceiver (single
mode, 10km 9/125µm)
1G Copper SFP Transceiver
CAUTION: The SFP+ port on the GS108X supports 10G on ber
modules only. It does not support 10G copper modules and will
not pass trafc through a 10G copper module. However, 1G copper
modules are supported.
AGM734
NETGEAR 1000BASE-T SFP RJ45 Transceiver
10G SFP+ DAC
AXC761 NETGEAR 10G Direct Attach SFP+ to SFP+ 1 Meter
Passive DAC Cable
AXC763
NETGEAR 10G Direct Attach SFP+ to SFP+ 3 Meter Passive
DAC Cable
10G Fiber SFP+ Transceiver
AXM761
NETGEAR 10GBASE-SR SFP+ LC Transceiver (multimode,
550m OM4, 300m OM3 50/125µm, 33m OM2/OM1
62.5/125µm)
AXM762
NETGEAR 10GBASE-LR SFP+ LC Transceiver (single mode,
10km 9/125µm)
AXM764 NETGEAR 10GBASE-LR LITE SFP+ LC Transceiver
(single mode, 2km 9/125µm)

Termékspecifikációk

Márka: Netgear
Kategória: nincs kategorizálva
Modell: GS108MX

Szüksége van segítségre?

Ha segítségre van szüksége Netgear GS108MX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek